Upgrading An Existing Windows Nt Version 4 Installation To Windows 2000 - HP D5970A - NetServer - LCII Installation And Configuration Manual

1. Start Windows 2000.
2. Click the Start button on the Windows 2000 task bar, and then point to
Settings.
3. Click the Control Panel.
4. Double-click the System icon.
5. Select the Hardware tab and click the Device Manager button.
6. Under SCSI and RAID Controllers, click on the + sign to the left. This will
display the SCSI adapters currently installed. Right-click on the device you
wish to update and select Properties.
7. Click the Driver tab and click the Update Driver button. The Update
Device Driver Wizard will start. Click Next.
8. Select the Search for a suitable driver option and click Next.
9. Select the location where the updated driver is installed and click Next.
10. At this step, Windows 2000 will recommend one of two choices. If it
recommends using the driver found on the driver disk, then click Next and
skip to Step 12. It might recommend that you keep the existing driver and
mention that it found other suitable drivers. If this is the case, select Install
one of the other drivers and click Next.
11. You may be asked to enter the path for the driver.
12. \win2000\ultra160\adpu160m.sys
13. Click Finish. You may be required to reboot your system.
Upgrading an Existing Windows NT Version 4
Installation to Windows 2000
1. With your operating system started, insert your Windows 2000
CD-ROM and choose to upgrade your system. Your system will reboot.
2. The Windows 2000 Setup program will start. Press F6 when this message is
displayed:
Press F6 if you need to install a third party SCSI or RAID driver...
38