HP D5970A - NetServer - LCII Installation And Configuration Manual page 77

Please enter the names of the packages you wish to
install, or q to quit:
c
At this point, type ad160 and press Enter. The screen then displays this mes-
sage and various installation status prompts:
Installing adl60
When the driver is loaded, the following message appears, indicating that the
adl60 driver has been loaded into the Link Kit for kernel addition:
Installed adl60
#
3
Modify the mscsi file, if necessary, to change your primary host bus adapter to an
Ultra3 SCSI host bus adapter, using the procedure below:
a
Enter the following command:
cd /etc/conf/cf.d
b
Use a text editor to edit this file. Enter the following command if using the vi
editor:
vi mscsi
c
Search for all entries with the host bus adapter number 0 (zero). The host bus
adapter number is the third column in each entry. For example:
Host SCSI
Adapter Device
Prefix Type
xx Stp
xx Sdsk
xx Srom
1
This field applies to SCO OpenServer 5 and later.
Host Target Logical
Adapter ID Unit
Number Number
0 2
0 0
0 5
1
Bus
0 0
0 0
0 0
71