HP D5970A - NetServer - LCII Installation And Configuration Manual page 70

[xxxxx084] Adapter software initialization failure
An error has occurred while the driver was setting up its internal data structures.
Try installing the most up-to-date version of the driver available from the HP
Web site located at http://netserver.hp.com/netserver/
[xxxxx085] Unable to allocate memory
This indicates that there may be a problem with the amount of memory installed
in your system. Verify that your system has at least the minimum amount of
memory required by your operating system.
[xxxxx087] Internal driver error
An error has occurred while the driver was setting up its internal data structures.
Try installing the most up-to-date version of the driver available from the HP
Web site located at http://netserver.hp.com/netserver/
[xxxxx088] Adapter software initialization failure
An error has occurred while the driver was setting up its internal data structures.
Try installing the most up-to-date version of the driver available from the HP
Web site located at http://netserver.hp.com/netserver/
[xxxxx089] Unable to allocate memory
This indicates that there may be a problem with the amount of memory installed
in your system. Verify that your system has at least the minimum amount of
memory required by your operating system.
[xxxxx096] Adapter hardware initialization failure - possible resource
conflict
The driver has attempted to initialize the adapter hardware but failed. This
might suggest that the adapter resources (e.g., IRQ) conflict with the resources
of another board installed in your system.
64