HP D5970A - NetServer - LCII Installation And Configuration Manual page 97

NOTE When reporting problems to Customer Support, be sure to include the
complete error code in your problem description.
[xxxxx003] Command completed with error
[xxxxx004] Command completed with error
[xxxxx005] Command completed with error
[xxxxx006] Command completed with error
[xxxxx007] Command completed with error
[xxxxx008] Command completed with error
[xxxxx009] Command completed with error
A request issued to a target device completed with an indication that there is an
error. In most cases, the error is recovered and normal operation continues.
[xxxxx010] Error issuing command
An error has occurred while the driver was setting up its internal data structures.
Try installing the most up-to-date version of the driver available from the
http://netserver.hp.com/netserver/
[xxxxx011] Error issuing command
The requested command is not supported by this driver.
[xxxxx012] Error issuing command
The driver does not recognize the target device.
[xxxxx013] Error issuing command
[xxxxx014] Error issuing command
An error has occurred while the driver was setting up its internal data structures.
Try installing the most up-to-date version of the driver available from the HP
web site located at http://netserver.hp.com/netserver/
[xxxxx015] Error issuing command
An error has occurred with the driver. Try installing the most up-to-date version
of the driver available from the HP web site located at
http://netserver.hp.com/netserver/
91