HP D5970A - NetServer - LCII Installation And Configuration Manual page 15

Point-to-Point LVD Twisted-Pair SCSI Cable
Figure 1-7. Hot-Plug Cage Cable Connections
Connecting Ultra/Fast Wide SCSI Devices
Connect internal Ultra/Fast Wide SCSI devices to the 68-pin internal SE Wide
SCSI connector. To do this, use a flat 68-pin Wide SCSI cable. Follow these
steps to connect the devices:
1. Plug one end of the cable to the Ultra/Fast Wide SCSI connector on the HP
Ultra3 SCSI host bus adapter.
9