HP D5970A - NetServer - LCII Installation And Configuration Manual page 75

CAUTION
Installing or updating the driver involves the following tasks, which must be
completed in the order presented:
• Back up the old UNIX kernel and any other important files.
• Use installpkg to load the driver.
• Change the primary host bus adapter to an Ultra3 SCSI host bus adapter,
if necessary.
• Rebuild the kernel to reflect the new changes.
• Reboot the computer with the new kernel.
NOTE
To update or install the driver, you must first enter the Single User
Mode (System Maintenance Mode). Refer to the SCO OpenServer
documentation for instructions on how to use the init(m) or
shutdown(m) command to put the system into System Maintenance
Mode.
1
Perform a System Backup
If you have not already done so, back up all important files on the computer by
following these steps:
NOTE To back up the whole system, refer to your SCO OpenServer
documentation.
a
Log in as root.
b
To back up the current kernel configuration, type the following and press Enter
after each line:
umount /stand
Improper or corrupt driver updates might destroy your
existing UNIX file system. Back up all important files
before proceeding.
69