Testing The Processor; Re-Installing The Nos; Removing A Processor Module - HP NetServer LH 6000 Installation Manual

All manuals and user guides at all-guides.com
Chapter 7

Testing the Processor

After you power on the HP NetServer, check boot messages to see whether or not
the system detects the additional processor. If boot messages indicate that the
additional processor has not been found, check the installation of the processor
and the VRM and verify that the speed and cache size are correct.

Re-installing the NOS

You may have to re-install your Network Operating System in order to use the
additional processor. If you have gone from a single-processor to multi-processor
configuration, check your NOS documentation or the README First file and
Configuration Advisor utilities on the HP NetServer Navigator CD-ROM.
This completes the installation of the additional processor.

Removing a Processor Module

Use the same procedure as above, and simply remove the processor module rather
than add it. Be sure to remove the associated VRM and keep it with the processor.
CAUTION
Replace the removed processor with a terminator/baffle.
78
Installing Additional Processors