Tools Required - HP D5970A - NetServer - LCII User Manual

Chapter 6
NOTE If you ever choose to remove one of the processor boards and
run the HP NetServer with fewer processors, a terminator
board must be installed in place of the processor board.
HP Navigator CD-ROM. You are not required to use the HP Navigator
CD-ROM to reconfigure your system after installing the new processor
board. However, we recommend that you use it to ensure that you have the
latest drivers and information.
Figure 6-3. 200 MHz/1MB Processor Board

Tools Required

An antistatic service kit (3M
includes a static-dissipating work surface, a chassis clip lead, and a wrist
strap.
Number 1 Phillips head screwdriver.
Installing Additional Boards
TM
8501/8502/8503 or equivalent). This kit
49