Chapter 2
Table 2-3. Rear Panel Control and Indicator Definitions
Control
Power Interlock
This switch is mounted on the base chassis. When you turn this
Switch
switch clockwise, you disable DC power and release the satellite
chassis. You can then pull out the satellite chassis and open the
satellite's top cover.
Satellite Ejector
These handles are mounted on the satellite chassis. Use them to
Handles
pull the satellite out from the base chassis. After turning the
power interlock switch clockwise, grasp the ejector handles and
pull them down and towards you. The satellite should then move
toward you on its slides.
Fan Pack
Each of the HP NetServer's two fan packs has an indicator which
Temperature
lights up when one or more fans in the fan pack have failed.
Indicators
Boot Status
Displays Power-On Self-Test codes during startup.
LEDs
Controls, Indicators, and Ports
Description
9
Need help?
Do you have a question about the D5970A - NetServer - LCII and is the answer not in the manual?
Questions and answers