HP D5970A - NetServer - LCII User Manual page 87

Chapter 9
To use the Boot Menu:
1. Boot or reboot the system. After the first boot messages are displayed, this
prompt appears:
Press <F2> to enter SETUP or <ESC> to enter Boot
Menu
2. Press the Esc key. At the end of the Power-On Self-Test, a menu appears
that looks something like this:
1. ATAPI CD-ROM Drive
2. Diskette Drive
3. Hard Drive
4. Toshiba CD-ROM Drive
3. Use your keyboard's arrow keys to select the device you want to boot from.
Then press the Enter key. The system continues its startup sequence and
boots from the device you selected.
NOTE
To choose the HP NetServer's CD-ROM drive, choose
Toshiba CD-ROM drive from the menu. Do not choose
ATAPI CD-ROM Drive. The Toshiba listing only appears
when a bootable CD-ROM is in the drive.
Configuring the System
79