4 Replacement Procedures
4.16 Sound board
Removing the Sound board
To remove the sound board, follow the steps below and refer to figure 4-25.
1. Disconnect the sound board I/F cable from the connector PJ9550 on the system board
and from the connector on the sound board.
2. Remove the following screws securing the sound board.
M2.5 6B
3. Remove the sound board.
Sound board I/F cable
4-44
FLAT HEAD screw
Figure 4-25 Removing the sound board
2
PJ9550
M2.5 6B FLAT HEAD
Sound board
Satellite A40 Maintenance Manual (960-458)
4.16 Sound board