4.2 Battery pack
4.2
Battery pack
Removing the Battery pack
To remove the battery pack, follow the steps below and refer to figure 4-1.
CAUTION: When handling battery packs, be careful not to short circuit the terminals.
Also do not drop, hit or apply impact; do not scratch, break, twist or bend
the battery pack.
1. Turn off the computer.
2. Disconnect the AC adapter and other external devices from the computer.
3. Turn the computer face down.
4. Release the battery lock. Lift up the battery pack while sliding the battery latch.
Satellite A40 Maintenance Manual (960-458)
4 Replacement Procedures
4-9