Accessing The Setup Program - Toshiba Satellite A40 Maintenance Manual

3 Tests and Diagnostics
3.23.2

Accessing the SETUP Program

Selecting 0 from the DIAGNOSTICS MENU and pressing Enter displays the SETUP screen.
The SETUP screen is divided into two pages.
MEMORY
Total
SYSTEM DATE/TIME
Date(MM-DD-YY)
Time(HH:MM:SS)
BATTERY
Battery Save Mode = Full Power
PASSWORD
Not Registered
: Select items Space, BkSp: Change values PgDn, PgUp: Change pages
Esc: Exit without saving
Exit
CONFIGURATION
Device Config.
I/O PORTS
Parallel
LPT1(378H/IRQ7/CH3)
DRIVERS I/O
Built-in HDD
= Primary IDE(1F0H/IRQ14)
CD-ROM = Secondary IDE(170H/IRQ15)
PCI BUS
PCI BUS
: Select items Space, BkSp: Change values PgDn, PgUp: Change pages
Esc: Exit without saving
Exit
NOTE: Panel Power On/Off item appears only when the Power-up Mode is in Resume
mode.
3-54
SYSTEM SETUP (1/2)
= XXXXX KB
= XX-XX-XXXX
= XX:XX:XX
Home : Set default values
SYSTEM SETUP (2/2)
= Setup by OS
=
= IRQ10, IRQ11
Home : Set default values
ACPI BIOS version = X.XX
BOOT PRIORITY
Boot Priority = HDD FDD CD-ROM LAN
HDD Priority = Built-in HDD PC Card
Network Boot Protocol = PXE
DISPLAY
Power On Display
Selected
LCD Display Stretch = Enabled
Others
Power-up mode
CPU Cache
Level 2 Cache
Enabled
Dynamic CPU Frequency Mode
= Dynamically Switchable
Hyper-Threading Technology = Enabled
Auto Power On
End: Save changes and
ACPI BIOS version = X.XX
PC CARD
Controller Mode = Auto-Selected
PERIPHERAL
Internal Pointing Device
Parallel Port Mode
Hard Disk Mode = Enhanced IDE(Normal)
LEGACY EMULATION
USB KB/Mouse Legacy Emulation
USB-FDD Legacy Emulation
PCI LAN
Built-in LAN = Enabled
End: Save changes and
Satellite A40 Maintenance Manual (960-458)
3.23 SETUP
= Auto-
= Boot
= Enabled
=
= Disabled
= Enabled
= ECP
= Enabled
=