4.26 Fluorescent lamp
Assembling Fluorescent lamp
Putting the double-sided tapes on the bezel
1. Attach the double-sided tape to the reverse side of the bezel, as shown in Figure 4-68.
The end of tape must
not go beyond the
?? ?? ? ? ? ? ? ? ? ? ?
opening of bezel.
? ? ? ? ? ?
Figure 4-68 Replacing 14 Inch TMD fluorescent lamp (6)
Satellite A40 Maintenance Manual (960-458)
? ? ? ? ?
Reverse side of the bezel
Requirements for attaching
? ? ? ? ?? ?? ?
double–sided tape
Tape must not go
Double-sided tape
? ? ? ? ? ? ? ?
beyond the opening
(4597, Sumitomo 3M)
? ? ? ? ? ? ? ?? ? ? ?
? ? ? ? ? : 4 5 9 7 ( ? ? 3M )
of the bezel.
(tape length)
2 8 5
± 0 . 5
4 Replacement Procedure
The end of tape must not
go beyond the opening of
bezel.
( ? ? ? ? ? )
Tapes must not be overlapped.
?? ?? ? ? ? ? ? ? ? ? ?
? ? ? ? ? ?
? ? ?? ? ? ? ? ? ? ? ?
4-85