4.5 HDD
3. Remove the following screws and pull the tab of the HDD pack to remove it. Be careful
not to damage the connector.
M2.5 4B
NOTE: The following steps describe how to disassemble the HDD pack; however, do not
disassemble if the HDD is working properly.
4. Remove the following screws .
M3 4S
5. Detach the HDD from the HDD bracket.
CAUTION: Do not apply pressure to the top and bottom of the HDD.
M3 4S FLAT HEAD
Satellite A40 Maintenance Manual (960-458)
FLAT HEAD screw
FLAT HEAD screw
HDD bracket
Figure 4-5 Detaching the HDD bracket and HDD
4 Replacement Procedures
1
4
HDD
M3 4S FLAT HEAD
4-17