Rtc Battery Removal; Power Supply Board Removal; Sd/Sound Board Removal; System Board Removal - Toshiba Satellite Pro 6100 Series Quick Start Manual

FIELD REPLACEABLE UNIT DOCUMENTATION

RTC BATTERY REMOVAL

PJ5 RTC harness
1. Disconnect the RTC harness from PJ5 on the
Battery/LED board.
2. Lift out the RTC battery.

SD/SOUND BOARD REMOVAL

Wireless LAN switch button
1. Disconnect the sound interface cable from PJ103
and the SD interface cable from PJ150 on the
SD/Sound board.
2. Remove one M2.5x4 black flat head screw
securing the SD/Sound board.
3. Remove the wireless LAN switch button.
4. Lift out the SD/Sound board.
Satellite Pro
6100 Series
RTC Battery
SD
interface
cable
PJ2150
Sound
Interface
cable
PJ2103
SD/Sound board
M2.5x4 black flat head screw
TOSHIBA
Tough Enough for Today's World.
TM

POWER SUPPLY BOARD REMOVAL

Power supply board
1. Disconnect the power supply harness from PJ850
and PJ851 on the system board.
2. Remove two M2.5x4 black flat head screws securing
the power supply board.
3. Disconnect the power supply board from the system
board.

SYSTEM BOARD REMOVAL

HDD guide
assy
M2.5x6 black flat head screws
1. Remove one M2.5x6 black flat head screw securing
the HDD guide assembly and lift out the HDD guide
assembly.
2. Remove three M2.5x6 black flat head screws
securingthe select bay cover and lift out the select
bay cover.
Power supply
harness
M2.5x4 black flat head screws
M2.5x6 flat
head black
screw
Select bay cover
System
board