Sound Board - Toshiba TECRA M3 Maintenance Manual

Personal computer

Hide thumbs Also See for TECRA M3:

Table of Contents

4.14 Sound board

Removing the Sound board

To remove the sound board, follow the steps below and refer to Figure 4-28.

1. Disconnect the sound board flexible cable from the connector PJ9510 on the sound

board and the connector CN9500 on the system board.

2. Peel off the glass tape on the sound board cable.

3. Remove the following screws fixing the HDD con holder.

4. Disconnect the sound board cable from the connector CN9511 on the sound board and

the connector CN9501 on the system board.

5. Remove the sound board cable while lifting up the HDD con holder

6. Remove the sound board.

M2.5? 4B FLAT HEAD

HDD con holder

Sound board cable

TECRA M3 Maintenance Manual (960-507)

FLAT HEAD screw

4 Replacement Procedures

M2.5? 4B FLAT HEAD

Sound board flexible cable

Table of Contents