Sound Board - Toshiba Tecra 700CS Maintenance Manual

4.11 Sound Board

Removing the Sound Board
To remove the sound board, follow the steps below and refer to Figure 4-26.
1. Turn off the power to the computer, then disconnect the AC adapter and all
external cables connected to the computer.
2. Remove the battery pack, optional memory module, optional PCMCIA card, FDD
or optional CD-ROM drive, HDD, upper cover and keyboard, speakers, keyboard
base and display assembly, and infrared board as described in Sections 4.2 through
4.10.
3. Remove one M2.5x4 screw.
4. Use a jeweler's screwdriver to separate connectors PJ1 and PJ2 on the sound
board from PJ14 and PJ15 on the system board.
5. Lift off the sound board.
700 Series
Figure 4-26 Removing the sound board
4-29