Toshiba Satellite A40 Maintenance Manual page 193

3 Tests and Diagnostics
10. Drives I/O
This option displays the address and interrupt level for the hard disk drive, CD/DVD-ROM
drive and PC card. It is for information only and cannot be changed.
Built-in HDD
CD-ROM
PC Card
11. PCI Bus
This option displays the interrupt level for the Card Bus in the computer. It is for information
only and cannot be changed.
PCI BUS
12. PC Card
This option displays the PC Card Controller mode.
Auto-Selected
CardBus/16-bit
PCIC Compatible
13. Peripheral
Use this option to select the peripheral's mode.
(a) Internal Pointing Device
This option enables or disables the touch pad
Enabled
Disabled
3-66
The setting for the built-in HDD is displayed.
The setting for the built-in CD-ROM is displayed.
This is displayed, when a PC card type HDD that can boot system is
inserted to PC card slot.
= IRQ10, IRQ11
Use this setting for all PC Card if you are using Windows
98/2000/XP which support Plug&Play. (Default)
If you are using Windows for Workgroups or Windows NT 4
or lower or if the card does not work properly with the Auto-
Selected setting, use this setting for Card Bus PC card.
If you are using Windows for Workgroups or Windows NT 4
or lower or if the card does not work properly with the Auto-
Selected and CardBus/16 bit setting.
Enables the touch pad. (Default)
Disables the touch pad.
Satellite A40 Maintenance Manual (960-458)
3.23 SETUP