Sound Board - Toshiba Portege R100 User Manual

4.13 Sound board

4.13 Sound board
Removing the sound board
The following describes the procedure for removing the sound board. (See Figure 4-24.)
1. Lift up and remove the sound board and cover.
2. Disconnect the sound cable from PJ999 on the sound board.
Installing the sound board
The following describes the procedure for installing the sound board. (See Figure 4-24.)
1. Connect the sound cable to PJ999 on the sound board.
2. Install the sound board to the cover, fitting the position of the wireless LAN
switch holder of the cover to the position of the sound board switch.
3. Install the cover (with the sound board) to the base, fitting to the guide pin. Pass
the tip of the cable holder under the board.
PORTEGE R100 Maintenance Manual (960-440)
Figure 4-24 Removing the sound board
4 Replacement Procedures
4-33