Repair Initial Config Set - Toshiba Satellite A40 Maintenance Manual

3.24 Repair initial config set

3.24 Repair initial config set
The following message will appear:
####################################################################
######### H/W initial information setting tool VerX.XX
####################################################################
*
* 1
* 2
* 8
* 9
*
********************************************************************
.... Press test number[1,2,8,9] ?
Press the number you want to test and press Enter.
Subtest 01 Initial configuration
This subtest executes the following items and displays the result.
- Setting CPU settable
- Setting Micro code
- Setting EHSS
- Inputting DMI information and writing it (Flash-ROM text)
(Writes the text adding time stamp to DMI information being written)
- Setting HWSC
- Setting UUID
When any abnormal is detected, it waits for any key input. (If the problem is solved,
execute it again)
To make all the setting effective, turns off the power.
Subtest 02 Region write
This subtest sets the DVD region code. (Executing or not is selectable.)
This subtest judges the destination based on the DMI information of the computer
and sets the appropriate region code to the DVD drive. If the region code has been
already written, this subtest is finished without setting.
Subtest 08 System configuration display
This subtest displays System configuration.
Subtest 09
E2PROM test (MAC/GUIDE/DMI)
Satellite A40 Maintenance Manual (960-458)
Initial configuration
Region write
System configuration display
E2PROM test (MAC/GUIDE/DMI)
3 Tests and Diagnostics
#####
*
*
*
*
*
*
3-69