1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. Laptop
  5. Satellite Pro A30-C
  6. User manual

Toshiba Satellite Pro A30-C User Manual

Hide thumbs Also See for Satellite Pro A30-C:
Table of Contents

Advertisement

Quick Links

Download this manual
User's Manual
PORTEGE A30-C/A30t-C
Satellite Pro A30-C/A30t-C/A40-C/
R40-C
TECRA A40-C

Advertisement

Table of Contents
loading

Related Manuals for Toshiba Satellite Pro A30-C

Summary of Contents for Toshiba Satellite Pro A30-C

  • Page 1 User's Manual PORTEGE A30-C/A30t-C Satellite Pro A30-C/A30t-C/A40-C/ R40-C TECRA A40-C...

  • Page 2: Table Of Contents

    The Keyboard ..................4-3 Using the AccuPoint ................4-6 Using the Fingerprint Sensor ............... 4-7 Optical disc drive .................. 4-9 CyberLink PowerDVD 14 DVD for TOSHIBA ........4-15 Battery ....................4-17 Wireless WAN Device (A30-C) ............4-24 Wireless WAN Device (A40-C/R40-C) ..........4-26...
  • Page 3 LAN ....................... 4-32 Memory media ..................4-34 Smart Card ................... 4-38 External Display .................. 4-39 TOSHIBA Hi-Speed Port Replicator III 180W/120W ......4-42 Security lock ..................4-44 Optional TOSHIBA Accessories ............4-45 Sound System and Video mode ............4-45 Chapter 5 Utilities and Advanced Usage Utilities and Applications ..............

  • Page 4: Chapter 1 Legal, Regulatory, And Safety

    Copyright, Disclaimer and Trademarks Copyright © 2018 Toshiba Client Solutions Co., Ltd. All Rights Reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No patent liability is assumed, with respect to the use of the information contained herein.

  • Page 5: Regulatory Information

    ® The Bluetooth word mark is a registered trademark owned by Bluetooth SIG, Inc. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are registered trademarks or trademarks of HDMI Licensing LLC in the United States and other countries. DTS, the Symbol, &...
  • Page 6 TOSHIBA is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer’s external RGB monitor port, Universal Serial Bus (USB 2.0 or 3.0) ports, HDMI™ out port and Headphone/Microphone jack.
  • Page 7 EMC (Electromagnetic Compatibility) standards. However, TOSHIBA cannot guarantee that this product still observes these EMC standards if options or cables not produced by TOSHIBA are connected or implemented. In this case the persons who have connected/implemented those options/cables have to provide assurance that the system (PC plus options/cables) still fulfils the required standards.
  • Page 8 Note that Canadian Department of Communications (DOC) regulations provide, that changes or modifications not expressly approved by TOSHIBA could void your authority to operate this equipment. Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
  • Page 9 Additional information as required by Regulation (EC) 1275/2008 amended by Regulation (EU) 801/2013 implementing European Eco-Design Directive with regard to requirements for standby, off mode and networked standby electric power consumption of electrical and electronic household and office equipment can be found here: http://www.toshiba.eu/Eco-Design User's Manual...
  • Page 10 For more detailed information about the collection and recycling programmes available in your country, please visit our website ( www.toshiba.eu/recycling ) or contact your local council office or the retail outlet where you purchased the product. Disposal of batteries and/or accumulators...
  • Page 11 Evaluation, Authorization and Restriction of Chemicals), entered into force on 1 June 2007, with phased deadlines to 2018. Toshiba will meet all REACH requirements and is committed to provide our customers with information about the presence in our articles of substances included on the candidate list according to REACH regulation.

  • Page 12: Video Standard Notice

    For more detailed information about recycling of this product, please visit our website ( http://www.toshiba-india.com ) or contact call center (1800-200-6768). The regulatory information represented by these symbols might not apply, depending on the country and region where you purchased the computer.
  • Page 13 Copyright (c) 1998-2011 The OpenSSL Project. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
  • Page 14 Original SSLeay License ---------------------------------- /* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) All rights reserved. This package is an SSL implementation written by Eric Young (eay@cryptsoft.com). The implementation was written so as to conform with Netscapes SSL. This library is free for commercial and non-commercial use as long as the following conditions are aheared to.

  • Page 15: Freetype License Issues

    PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  • Page 16 Finally, many people asked us for a preferred form for a credit/disclaimer to use in compliance with this license. We thus encourage you to use the following text: """ Portions of this software are copyright (C) <year> The FreeType Project www.freetype.org All rights reserved.
  • Page 17 This license grants a worldwide, royalty-free, perpetual and irrevocable right and license to use, execute, perform, compile, display, copy, create derivative works of, distribute and sublicense the FreeType Project (in both source and object code forms) and derivative works thereof for any purpose;...

  • Page 18: Energy Star® Program

    If the model you purchased is compliant, it uses the ENERGY STAR logo and the following information applies. TOSHIBA is a partner in the ENERGY STAR Program and has designed this computer to meet the latest ENERGY STAR guidelines for energy efficiency. Your computer...

  • Page 19: Disposing Of The Computer And The Computer's Batteries

    To prevent direct exposure to the laser beam, do not try to open the enclosure. Location of the Required Label (Sample shown below. Location of the label and manufacturing information might vary.) TOSHIBA SAMSUNG STORAGE TECHNOLOGY KOREA CORPORATION 14F, Bldg. No.102, Digital empire2, 486 Sin-dong, Yeongtong-gu, Suwon-si,...

  • Page 20: General Precautions

    General Precautions TOSHIBA computers are designed to optimize safety, minimize strain and withstand the rigors of portability. However, certain precautions should be observed to further reduce the risk of personal injury or damage to the computer.
  • Page 21 Leave enough space around the computer and other equipment to provide adequate ventilation. Otherwise, they might overheat. To keep your computer in prime operating condition, protect your work area from: Dust, moisture, and direct sunlight. Equipment that generates a strong electromagnetic field, such as stereo speakers (other than speakers that are connected to the computer) or speakerphones.
  • Page 22 Be careful not to spill liquids into the computer. If the computer does get wet, turn the power off immediately and let the computer dry completely. In these circumstances, you should get the computer inspected by an authorized service provider in order to assess the scope of any damage.

  • Page 23: Safety Icons

    Mobile phones Be aware that the use of mobile phones can interfere with the audio system. The operation of the computer will not be impaired in any way, but it is recommended that a minimum distance of 30 cm is maintained between the computer and a mobile phone that is in use.

  • Page 24: Chapter 2 Getting Started

    This chapter provides an equipment checklist, and basic information to start using your computer. If you use an operating system that was not pre-installed by TOSHIBA, some of the features described in this manual might not function properly. Equipment checklist Carefully unpack your computer, taking care to save the box and packaging materials for future use.

  • Page 25: Short Model Name

    Short model name Model name of your computer is shortened and referred to as the following in this manual. Full Model Name Short Model Name 33.8cm PORTEGE A30-C/A30t-C; Satellite Pro A30-C/ A30-C (13.3") A30t-C 35.6cm TECRA A40-C; Satellite Pro A40-C/R40-C A40-C/R40-C (14.0")
  • Page 26 Always use the TOSHIBA AC adaptor that was included with your computer, or use AC adaptors specified by TOSHIBA to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adaptor might cause fire or damage to the computer possibly resulting in serious injury.
  • Page 27 When you connect the AC adaptor to the computer, always follow the steps in the exact order as described in this User’s Manual. Connecting the power cable to a live electrical outlet should be the last step otherwise the adaptor DC output plug might hold an electrical charge and cause an electrical shock or minor bodily injury when touched.
  • Page 28 Connect the DC output plug of the AC adaptor to the DC IN 19V jack on your computer. Figure 2-3 Connecting the DC output plug to the computer (A30-C) Figure 2-4 Connecting the DC output plug to the computer (A40-C/R40-C) 1.
  • Page 29 Open and close the display panel with reasonable care. Opening it vigorously or slamming it shut might damage the computer. Do not put your fingers in the gap between the LCD panel and battery pack when closing your LCD, otherwise your fingers might get hurt. Be careful not to open the display panel too far as this might put stress on the display panel’s hinges and cause damage.

  • Page 30: Getting To Know Windows

    Figure 2-6 Turning on the power (A30-C) 1. Power button Product appearance depends on the model you purchased. Initial setup The Windows Startup Screen is the first screen displayed when you turn on the power. To install the operating system properly, follow the on-screen instructions on each screen.
  • Page 31 Task view Task view ( ) is launched from Windows taskbar at the bottom of the screen. Task view allows you to view the apps that are currently running. Also, you can create custom desktops so that running apps can be grouped for entertainment, productivity, or what you just want.

  • Page 32: Turning Off The Power

    Windows Hello Windows Hello is a more personal and secure way to sign in to your Windows system, apps, and services using fingerprint recognition. To set up Windows Hello, click Start -> (Settings) -> Accounts -> Sign- in options. Under Windows Hello, you will see options for Fingerprint if your computer has fingerprint sensor that supports it.
  • Page 33 Never turn off the power while an application is running. Doing so can cause data loss. Never turn off the power, disconnect an external storage device, or remove storage media during data read/write. Failure to do so can cause data loss. Click Start ->...
  • Page 34 Note that keyboard keys can only be used if the Wake-up on Keyboard option is enabled within the TOSHIBA Settings. If the computer enters Sleep Mode while a network application is active, the application might not be restored when the computer is next turned on and the system returns from Sleep Mode.
  • Page 35 When the computer is in Sleep Mode, the Power indicator blinks amber. If you are operating the computer on battery power, you can lengthen the overall operating time by turning it off into Hibernation Mode. Sleep Mode consumes more power while the computer is off. Sleep Mode limitations Sleep Mode will not function under the following conditions: Power is turned back on immediately after shutting down.

  • Page 36: System Recovery

    Restoring the pre-installed software from your created Recovery Media Restoring the pre-installed software from the Recovery Partition If you choose TOSHIBA Maintenance Utility to erase the internal storage drive, all data including the operating system and recovery partition will be User's Manual...
  • Page 37 In that case, you cannot create recovery media or restore the pre- installed software from the recovery partition. Make sure that you have already created recovery media before you start TOSHIBA Maintenance Utility. This recovery media can be used to restore your system after you have erased your internal storage drive.
  • Page 38 Do not close the display panel during the restoring process. When you reinstall the Windows operating system, the hard disk will be reformatted and all data will be lost. Make sure to use the default Boot Mode option in TOSHIBA Setup Utility before restoring. Launch the TOSHIBA Setup Utility.
  • Page 39 Recovery Media. However, if you have already created a "Recovery Media", you can use it to restore the recovery partition. If you have not created "Recovery Media", contact TOSHIBA support for assistance. Restoring the pre-installed software from the Recovery Partition A portion of the total internal storage drive space is configured as a hidden recovery partition.

  • Page 40: Chapter 3 The Grand Tour

    Chapter 3 The Grand Tour This chapter identifies the various components of the computer. It is recommended that you become familiar with each before you operate the computer. Legal Footnote (Non-applicable Icons) For more information regarding Non-applicable Icons, refer to the Legal Footnotes section.
  • Page 41 DC IN/Battery The DC IN/Battery indicator shows the indicator condition of the DC IN and the battery charge status. White indicates that the battery is fully charged while the power is being correctly supplied from the AC power adaptor. Refer to the Power Condition Descriptions section for more information on this feature.
  • Page 42 Figure 3-2 The left side of the computer (A30-C) 1. DC IN 19V jack 4. Optical disc drive* 2. LAN jack 5. Smart Card slot* 3. Universal Serial Bus (USB 3.0) port * Provided with some models. Product appearance depends on the model you purchased. DC IN 19V jack The AC adaptor connects to this jack in order to power the computer and charge its internal...
  • Page 43 Note that it is not possible to confirm the operation of all functions of all USB devices that are available. Some functions associated with a specific device might not operate properly. Before removing a USB device from the USB port of your computer, click the Safely Remove Hardware and Eject Media icon on the Windows Taskbar, and then select the USB device that you want to remove.
  • Page 44 Universal Serial Bus Two Universal Serial Bus ports, which comply to (USB 3.0) ports the USB 3.0 standard, are provided on the right side of the computer. USB 3.0 port is compliant with USB 3.0 standard and backward compatible with USB 2.0 devices. USB 3.0 port(s) might work as USB 2.0 port(s) when operating in USB Legacy Emulation mode.
  • Page 45 Back (A30-C) The following figure shows the back of the computer. Figure 3-4 The back of the computer (A30-C) 1. Battery pack Product appearance depends on the model you purchased. Battery pack The rechargeable lithium-ion battery pack provides power to the computer when the AC adaptor is not connected.
  • Page 46 180W/120W. Some models are equipped with the docking port. Only the TOSHIBA Hi-Speed Port Replicator III 180W or 120W is compatible with the docking port. Do not attempt to use any other Port Replicator. Keep foreign objects out of the docking port. A pin or similar object can damage the circuitry of the computer.
  • Page 47 10. AccuPoint* 3. Microphone* 11. AccuPoint control buttons* 4. Web Camera* 12. Touch Pad ON/OFF icon 5. Web Camera LED* 13. TOSHIBA eco icon 6. Display screen 14. Touch Pad 7. Power button 15. Touch Pad control buttons 8. Display hinges 16.
  • Page 48 Wireless Depending on the configuration of your communication computer, one or all of the following antennas are antennas built-in: Wireless LAN ® Wireless LAN/Bluetooth Some models are equipped with wireless communication antennas. Do not cover the wireless communication antennas area with any metal objects, otherwise the wireless function might not work.
  • Page 49 AccuPoint are equipped with AccuPoint control buttons. Touch Pad ON/OFF Double tap this icon to enable/disable the Touch icon Pad. TOSHIBA eco icon Double tap this icon to launch the TOSHIBA eco Utility. User's Manual 3-10...

  • Page 50: The Grand Tour For A40-C/R40-C

    Touch Pad The Touch Pad located in the palm rest is used to control the movement of the mouse pointer. To use the Touch Pad, simply touch and move your fingertip across it in the direction you want the mouse pointer to go. Touch Pad control The two buttons located on the bottom of the buttons...
  • Page 51 DC IN/Battery The DC IN/Battery indicator shows the indicator condition of the DC IN and the battery charge status. White indicates that the battery is fully charged while the power is being correctly supplied from the AC power adaptor. Refer to the Power Condition Descriptions section for more information on this feature.
  • Page 52 Optical disc drive The computer might be configured with a DVD Super Multi drive. Some models are equipped with an Optical disc drive. 2.6GB and 5.2GB DVD-RAM media cannot be read from or written to. Universal Serial Bus One Universal Serial Bus port, which complies to (USB 3.0) port the USB 3.0 standard, is provided on the left side of the computer.
  • Page 53 Smart Card slot This slot allows you to install a Smart Card device. Some models are equipped with a Smart Card slot. SIM Card slot This slot allows you insert a SIM card which enables a high-speed access to the Internet, corporate Intranet and your email while you are away from office.
  • Page 54 Universal Serial Bus Two Universal Serial Bus ports, which comply to (USB 3.0) ports the USB 3.0 standard, are provided on the right side of the computer. USB 3.0 port is compliant with USB 3.0 standard and backward compatible with USB 2.0 devices. The port with the icon ( ) has Sleep and Charge function, and this function is only provided with some models.
  • Page 55 LAN jack This jack lets you connect to a LAN. The adaptor has built-in support for Ethernet LAN (10 megabits per second, 10BASE-T), Fast Ethernet LAN (100 megabits per second, 100BASE-TX) or Gigabit Ethernet LAN (1000 megabits per second, 1000BASE-T). Refer to Operating Basics, for details.
  • Page 56 TOSHIBA Hi-Speed Port Replicator III 180W/ 120W described in TOSHIBA Hi-Speed Port Replicator III 180W/120W. Some models are equipped with the docking port. Only the TOSHIBA Hi-Speed Port Replicator III 180W or 120W is compatible with the docking port. User's Manual 3-17...
  • Page 57 Do not attempt to use any other Port Replicator. Keep foreign objects out of the docking port. A pin or similar object can damage the circuitry of the computer. Front with the display open (A40-C/R40-C) This section shows the computer with the display panel open. In order to open the display, lift up the display panel and position it at a comfortable viewing angle for you.
  • Page 58 10. AccuPoint* 3. Microphone* 11. AccuPoint control buttons* 4. Web Camera* 12. Touch Pad ON/OFF icon* 5. Web Camera LED* 13. TOSHIBA eco icon* 6. Display screen 14. Touch Pad 7. Power button 15. Touch Pad control buttons 8. Display hinges 16.
  • Page 59 Wireless Depending on the configuration of your communication computer, one or all of the following antennas are antennas built-in: Wireless LAN ® Wireless LAN/Bluetooth Some models are equipped with wireless communication antennas. Do not cover the wireless communication antennas area with any metal objects, otherwise the wireless function might not work.
  • Page 60 Double tap this icon to enable/disable the Touch icon Pad. Some models are equipped with the Touch Pad ON/OFF icon. TOSHIBA eco icon Double tap this icon to launch the TOSHIBA eco Utility. Some models are equipped with the TOSHIBA eco icon. User's Manual 3-21...

  • Page 61: Internal Hardware Components

    Touch Pad The Touch Pad located in the palm rest is used to control the movement of the mouse pointer. To use the Touch Pad, simply touch and move your fingertip across it in the direction you want the mouse pointer to go. Touch Pad control The two buttons located on the bottom of the buttons...

  • Page 62: Power Condition Descriptions

    Under certain unusual conditions of prolonged non-use and/or exposure to high temperatures, the HDD/SSD might be vulnerable to data retention errors. Legal Footnote (Internal Storage Drive Capacity) For more information regarding Internal Storage Drive Capacity, refer to the Legal Footnotes section.
  • Page 63 Power indicator Check the Power indicator to determine the power status of the computer. The following indicator conditions should be noted: White Indicates that power is being supplied to the computer, and the computer is turned on. Flashing Amber Indicates that the computer is in Sleep Mode and that there is sufficient power available (AC adaptor or battery) to maintain this condition.

  • Page 64: Chapter 4 Operating Basics

    Chapter 4 Operating Basics This chapter describes the basic operations of your computer, and highlights the precautions that must be taken when using it. Using the Touch Screen (only for A30-C) Some models are equipped with a touch screen. You can use your finger to manipulate icons, buttons, menu items, the on- screen keyboard, and other items on the touch screen.

  • Page 65: Using The Touch Pad

    Swipe Quickly move your finger in from the edge of the screen, without pausing when you first touch it. Swipe from the left edge: views all your open apps in task view. Swipe from the right edge: opens the Action center.

  • Page 66: The Keyboard

    Two-Finger Scroll Place two fingers down and slide them vertically or horizontally from anywhere on the Touch Pad. This allows you to operate the scroll bars of a window. Three-Finger Swipe Quickly move in with three fingers together from the edge of the Touch Pad, without pausing when you first touch it.
  • Page 67 Figure 4-1 CAPS LOCK indicator (A30-C) 1. CAPS LOCK indicator Product appearance depends on the model you purchased. CAPS LOCK This indicator glows green when letter keys are locked into their uppercase format. Function Keys The function keys (F1 ~ F12) are the12 keys at the top of your keyboard. Function keys let you enable or disable certain features of the computer.
  • Page 68 Some functions show the toast notification at the edges of the screen. Those toast notifications are enabled by default. You can disable them in TOSHIBA Settings. To access it, click Start -> TOSHIBA Settings -> Keyboard. Windows special keys The keyboard provides two keys that have special functions in Windows, ®...

  • Page 69: Using The Accupoint

    This key activates the Windows Start menu. This key has the same function as the secondary (right) mouse button. Using the AccuPoint To use the AccuPoint, simply push it with your finger tip in the direction you want to move the on-screen pointer. Two buttons above the Touch Pad work in the same way with the AccuPoint as they do with the Touch Pad.

  • Page 70: Using The Fingerprint Sensor

    Position a new cap on the peg and press it into place. The peg is square, so be careful to align the cap’s square hole with the peg. You can buy replacement AccuPoint caps from your TOSHIBA authorized dealer. Using the Fingerprint Sensor Some models are equipped with the fingerprint sensor for the purpose of enrolling and recognizing fingerprints.
  • Page 71 Avoid swiping with your finger stiff or pressed too hard onto the sensor, and take care to ensure that the center of the fingerprint is touching the sensor before swiping. Either of these conditions might cause fingerprint reading to fail. Check the center of the fingerprint whorl before swiping and then ensure this is swiped along the center line of the sensor.

  • Page 72: Optical Disc Drive

    Enroll two or more fingers. Enroll additional fingers if a recognition failure often occurs when using already enrolled fingers. Check the condition of your finger. Any conditions which have changed since enrollment, such as injury, rough skin, and extremely dry, wet, soiled, dirty, oily, soaked or swollen fingers, might lower the recognition success rate.
  • Page 73 Using the optical disc drive The full-size drive provides high-performance execution of disc based programs. You can run either 12 cm (4.72") or 8 cm (3.15") discs without an adaptor. For precautions on writing to discs, refer to the Writing discs section.
  • Page 74 place it in the disc tray. After seating the disc, however, make sure it lies flat. Do not touch the laser lens or any portion of its surrounding casing as this might cause misalignment. Prevent foreign objects from entering the drive. Check the surface of the disc tray, especially the area behind the front edge of the disc tray, to make sure there are no such objects before closing the drive.
  • Page 75 Figure 4-6 Manual release with the eject hole (A30-C) Φ1.0mm 1. Manual eject hole Product appearance depends on the model you purchased. Turn off the power before you use the manual eject hole. If the disc is spinning when you open the disc tray, the disc might fly off the spindle and cause injury.
  • Page 76 Based on TOSHIBA limited compatibility testing, we suggest the following manufacturers of disc media, however, it must be noted that disc quality can affect write or rewrite success rates. Also be aware that in no event does TOSHIBA guarantee the operation, quality or performance of any disc. CD-R: MITSUBISHI CHEMICAL MEDIA CO., LTD.
  • Page 77 CD-RW: (Multi-Speed, High-Speed and Ultra-Speed) MITSUBISHI CHEMICAL MEDIA CO., LTD. DVD-R: DVD Specifications for Recordable Disc for General Version 2.0 MITSUBISHI CHEMICAL MEDIA CO., LTD. (for 8x and 16x speed media) DVD-R DL: MITSUBISHI CHEMICAL MEDIA CO., LTD. (for 4x and 8x speed media) DVD+R: MITSUBISHI CHEMICAL MEDIA CO., LTD.

  • Page 78: Cyberlink Powerdvd 14 Dvd For Toshiba

    Be aware of the following limitations when you use the CyberLink PowerDVD 14 DVD for TOSHIBA: Notes on use This software can only be used on Windows operating system. CyberLink PowerDVD 14 DVD for TOSHIBA is only provided with models configured with a DVD Super Multi drive. User's Manual 4-15...
  • Page 79 Close all other applications when using the CyberLink PowerDVD 14 DVD for TOSHIBA. Do not open any other applications or carry out any other operations during video playback. Playback may stop or not function properly in some situations.

  • Page 80: Battery

    CyberLink PowerDVD 14 DVD for TOSHIBA Help. Use the following procedure to open CyberLink PowerDVD 14 DVD for TOSHIBA Help. Press the F1 key when CyberLink PowerDVD 14 DVD for TOSHIBA is launched. Battery This section explains battery types, use, recharging methods and handling.
  • Page 81 If the RTC battery becomes completely discharged, the system will lose this information and the real- time clock and calendar will stop working. You can change the Real-Time Clock settings in the TOSHIBA Setup Utility. Refer to Real-Time Clock for further information.
  • Page 82 Use only the computer connected to an AC power source or optional TOSHIBA Battery charger to charge the battery pack. Never attempt to charge the battery pack with any other charger. Charging Time (A30-C) The following table shows the approximate time required to charge an exhausted battery fully.
  • Page 83 Charging Time (A40-C/R40-C) The following table shows the approximate time required to charge an exhausted battery fully. Battery type Power off Power on Battery pack about 3 hours about 3 ~ 10 hours (45 Wh, 4 cell) RTC battery Does not Does not charge charge Be aware that the charging time when the computer is on is affected...
  • Page 84 Charge the battery until the DC IN/Battery indicator glows white. Repeat these steps two or three times until the battery recovers normal capacity. Monitoring battery capacity Remaining battery power can be monitored using the following methods. Clicking the battery icon on the Windows Taskbar Via the Battery Status in the Windows Mobility Center window Wait several seconds to monitor the remaining operating time because the computer needs time to check the remaining capacity of the...
  • Page 85 Batteries exhausted time (A30-C) When you turn off the power of your computer with batteries fully charged, the batteries exhaust within the following approximate period. Battery type Sleep Mode Shut Down Mode Battery pack about 3 days about 65 days (45 Wh, 4 cell) RTC battery about 7 years...
  • Page 86 The operating life of the battery pack will gradually reduce through repeated charging and discharging, and should be replaced when it reaches the end of its operating life. In addition to this, you might also replace a discharged battery pack with a charged spare when you are operating your computer away from an AC power source for an extended period of time.

  • Page 87: Wireless Wan Device (A30-C)

    Installing the battery pack To install a battery pack, do the following: Do not touch the battery release latch while holding the computer or the battery pack might fall out due to the unintentional release of the battery release latch and cause injuries. Insert the battery pack as far as it will go into the computer.
  • Page 88 To pop the SIM card tray partially open, insert a slender object (about 10mm, diameter 0.8mm), such as a straightened paper clip, into the eject hole. Gently pull to open the SIM card tray. Never pull the SIM card tray completely out of the slot. Figure 4-8 Open the SIM card tray with the eject hole (A30-C) 1.

  • Page 89: Wireless Wan Device (A40-C/R40-C)

    Wireless WAN Device (A40-C/R40-C) Some models are equipped with the Wireless WAN device. This device gives you the ability for a high-speed connection to the Internet, corporate intranet, and your email while you are away from the office. Installing a SIM card (A40-C/R40-C) To install a SIM card, do the following: Click Start ->...

  • Page 90: Gps Function

    Install the battery pack. Figure 4-10 Installing the SIM Card (A40-C/R40-C) 1. SIM card tray 2. SIM card Product appearance depends on the model you purchased. Never allow metal objects, such as screws, staples and paper clips, to enter the computer. Foreign metal objects can create a short circuit, which can cause computer damage and fire, possibly resulting in serious injury.

  • Page 91: Additional Memory Module (Only For A30-C)

    When installing or removing a memory module, you must ensure that you do not touch any other internal areas of the computer. Use only memory modules approved by TOSHIBA. Do not try to install or remove a memory module under the following conditions.
  • Page 92 Use a point size 0 Phillips screwdriver to remove and fasten the screws. The use of an incorrect screwdriver can damage the screw heads. Installing a memory module To install a memory module, do the following: Click Start -> (Power) and then click Shut down while holding down the SHIFT key.
  • Page 93 Align the notch of the memory module with that of the memory slot and gently insert the module into the slot at about a 30 degree angle before holding it down until the latches on either side snap into place. Figure 4-12 Seating the memory module 1.
  • Page 94 Seat the memory module cover in place and secure it with the screw. Ensure that the memory module cover is firmly closed. Figure 4-13 Seating the memory module cover 1. Memory module cover 2. Screws Product appearance depends on the model you purchased. Install the battery pack.

  • Page 95: Lan

    Do not touch the connectors on the memory module or on the computer. Debris on the connectors might cause memory access problems. Figure 4-14 Removing the memory module 1. Latches Product appearance depends on the model you purchased. Seat the memory module cover in place and secure it with the screw. Ensure that the memory module cover is firmly closed.
  • Page 96 LAN cable types The computer must be configured properly before connecting to a LAN. Logging onto a LAN using the computer’s default settings might cause a malfunction in LAN operation. Check with your LAN administrator regarding set-up procedures. If you are using Gigabit Ethernet LAN (1000 megabits per second, 1000BASE-T), be sure to connect with a CAT5e cable or higher.

  • Page 97: Memory Media

    Plug one end of the cable into the LAN jack. Press gently until you hear the latch click into place. Figure 4-15 Connecting the LAN cable (A30-C) Figure 4-16 Connecting the LAN cable (A40-C/R40-C) 1. LAN jack 2. LAN cable Product appearance depends on the model you purchased.
  • Page 98 Figure 4-17 Examples of memory media Secure Digital (SD) Card microSD card adaptor and microSD card MultiMediaCard (MMC) Points to note about the memory media card SD/SDHC/SDXC memory cards comply with SDMI (Secure Digital Music Initiative), which is a technology adopted to prevent unlawful copy or playback of digital music.
  • Page 99 To format all areas of the memory card, including the protected area, you must obtain an appropriate application that applies the copy protection system. Media care Observe the following precautions when handling the card. Do not twist or bend cards. Do not expose cards to liquids or store in humid areas or lay media close to containers of liquid.
  • Page 100 Press the memory media gently until it clicks into place. Figure 4-18 Inserting memory media (A30-C) Figure 4-19 Inserting memory media (A40-C/R40-C) 1. Memory media slot 2. Memory media Product appearance depends on the model you purchased. Make sure that the memory media is oriented properly before you insert it.

  • Page 101: Smart Card

    If you remove the memory media or turn off the power while the computer is accessing the memory media, you might lose data or damage the media. Do not remove the memory media while the computer is in Sleep or Hibernation Mode.

  • Page 102: External Display

    Be careful not to bend the Smart Card while removing it from the computer. Failure to follow these instructions might result in damage to the computer and/or damage to the Smart Card. After inserting the Smart Card, you should refer to its documentation and also check the configuration in Windows to ensure that it is correct.
  • Page 103 When you turn on the power, the computer automatically recognizes the monitor and determines whether it is a color or monochrome device. When displaying desktop on an external RGB monitor, desktop is sometimes displayed on the center of the monitor with black bars around desktop (with small size).
  • Page 104 Settings for display video on HDMI™ To view video on the HDMI™ display device, be sure to configure the following settings otherwise you might find that nothing is displayed. Be sure to use the function key to select the display device before starting to play video.

  • Page 105: Toshiba Hi-Speed Port Replicator Iii 180W/120W

    TOSHIBA Hi-Speed Port Replicator III 180W/ 120W In addition to the ports available on the computer, the TOSHIBA Hi-Speed Port Replicator III 180W/120W also provides several kinds of ports. The Port Replicator connects directly to the docking interface on the underside of the computer.
  • Page 106 For A40-C: Align the top left or top right corner of your computer to the B+ mark on the Port Replicator. Press down on the back of the computer until it clicks into place. The computer connector on the port replicator engages the computer’s docking port.

  • Page 107: Security Lock

    Make sure the AC adaptor is always connected to the TOSHIBA Hi-Speed Port Replicator III 180W/120W while in use. Otherwise the Port Replicator will stop working, possibly resulting in data loss. Some models support multiple display function if equipped with a TOSHIBA Hi-Speed Port Replicator III 180W/120W.

  • Page 108: Optional Toshiba Accessories

    Battery section for further information. TOSHIBA Hi-Speed TOSHIBA Hi-Speed Port Replicator III 180W/ Port Replicator III 120W provides several kinds of ports. Refer to 180W/120W the Port Replicator’s User's Manual for more details.
  • Page 109 To adjust the volume level of an application that you are using, move the slider for the corresponding application. Microphone Level To change the microphone recording level, do the following: Click Start -> Windows System -> Control Panel -> Hardware and Sound ->...
  • Page 110 Realtek HD Audio Manager You can confirm and change the audio configuration using the Realtek HD Audio Manager. To launch the Realtek HD Audio Manager: Click Start -> Windows System -> Control Panel -> Hardware and Sound -> Realtek HD Audio Manager. When you first launch the Realtek HD Audio Manager, you can see two device tabs.
  • Page 111 If you are running some applications (for example a 3D application or video playback), you might see some disturbance, flickering, or frame dropping on your screen. If that occurs, adjust the resolution of display, lowering it until the screen is displayed properly.

  • Page 112: Chapter 5 Utilities And Advanced Usage

    TOSHIBA Settings TOSHIBA Settings is the TOSHIBA configuration management tool available through the Windows operating system. To run TOSHIBA Settings, click Start -> TOSHIBA Settings. This utility allows you to configure your computer settings by the following tabs: Home—Allows you to view the current BIOS/EC version or change certain settings back to their default values eco Utility—Allows you to manage the power consumption of your...
  • Page 113 OFF. "Power OFF" includes Sleep Mode, Hibernation Mode, or shutdown state. To set USB Sleep and Charge feature, click Start -> TOSHIBA Settings -> USB Charge. Move the slider to enable or disable the Sleep and Charge function.
  • Page 114 The Sleep and Charge function might not work with certain external devices even if they are compliant with the USB specification. In those cases, turn the power of the computer ON to charge the device. When Sleep and Charge function is enabled, USB bus power (DC5V) is supplied to compatible ports even when the power of the computer is turned OFF.
  • Page 115 USB charge while the computer is powered on. When "System ON CDP Charge Mode" is enabled, your computer can supply USB bus power (DC5V, 1.5A) to the compatible ports while the computer is turned on. To set System ON CDP Charge Mode, click Start -> TOSHIBA Settings -> USB Charge. Enabled Rapid USB battery charge at maximum 1.5A...
  • Page 116 Passwords set by System Password function are different from the Windows password. User Password To set user password, click Start -> TOSHIBA Settings -> System Password. User authentication might be required to validate user rights when using System Password to delete or change passwords, and so on.
  • Page 117 If you set a Supervisor Password, some functions might be restricted when a user logs on with the User Password. To set a Supervisor Password: Click Start -> TOSHIBA Settings -> System Password. Then click the down arrow next to Advanced options to show the Supervisor Password settings.
  • Page 118 Options—Allows you to set options for sending data logs TOSHIBA Setup Utility TOSHIBA Setup Utility is a BIOS setup utility that provides you a menu- based user interface so that you can easily view and change BIOS settings. To enter the TOSHIBA Setup Utility, do the following: Save your work.

  • Page 119: Special Features

    Special features The following features are either unique to TOSHIBA computers or are advanced features which make the computer more convenient to use. Access each function using the following procedures.
  • Page 120 System automatic This feature automatically shuts down the system Sleep/Hibernation into either Sleep Mode or Hibernation Mode when there is no input or hardware access for a Mode specified time. This can be specified in the Power Options. Power on password Two levels of password security, supervisor and user, are available to prevent unauthorized access to your computer.
  • Page 121 USB Wakeup function This function restores the computer from Sleep Mode depending on the external devices connected to the USB ports. For example, if a mouse or USB keyboard is connected to a USB port, clicking the mouse button or pressing the keyboard will wakeup the computer.

  • Page 122: Troubleshooting

    In reality many problems can be solved simply, but a few might require help from TOSHIBA Support. If you find you need to consult others, be prepared to describe the problem in as much detail as possible.
  • Page 123 Always try to make detailed notes of your observations and keep them in a permanent error log - this helps you to describe your problems to TOSHIBA Support. In addition, if a problem recurs, the log you have made helps to identify the problem faster.
  • Page 124 Before using a peripheral device or application software that is not an authorized TOSHIBA part or product, make sure that the device or software can be used with your computer. Use of incompatible devices might cause injury or might damage your computer.

  • Page 125: Hardware And System Checklist

    By holding down one of the following keys during startup, your computer can load the following advanced options. Advanced option TOSHIBA Setup Utility Boot Menu 0 (zero) Recovery options If your computer starts to load the Operating System instead of desired advanced options, do the following: Click Start ->...
  • Page 126 If the computer has reached room temperature and it still does not start, or if it starts but shuts down quickly, contact TOSHIBA Support. AC power If you have trouble turning on the computer with the AC adaptor connected, check the status of the DC IN/Battery indicator.
  • Page 127 However, if you do not believe the battery is at the end of its operating life, you should speak to TOSHIBA Support. Battery does not If you frequently recharge a partially charged...
  • Page 128 The RTC battery should be replaced only by your dealer or by a TOSHIBA service presentative, and then set the date/time in the TOSHIBA Setup Utility by using the following steps: Launch the TOSHIBA Setup Utility.
  • Page 129 (remapping involves changing or reassigning the function of each key). If you are still unable to use the keyboard, you should contact TOSHIBA Support. Internal display panel Apparent problems of the computer's display panel might be related to setup and configuration of the computer.
  • Page 130 As a last resort, you should reformat the HDD and then reload the operating system and all other files and data. If you are still unable to resolve the problem, contact TOSHIBA Support. Optical Disc Drive For further information, refer to Operating Basics.
  • Page 131 If you are still unable to resolve the problem, contact TOSHIBA Support. Pointing device If you are using a USB mouse, you should also refer to both the mouse section and the documentation supplied with your mouse.
  • Page 132 Control Panel -> Hardware and Sound -> sensitive enough. Mouse. If you are still unable to resolve the problem, contact TOSHIBA Support. USB mouse Problem Procedure Mouse pointer does In this instance, the system might be busy.Try...
  • Page 133 Sleep and Charge Enable the Sleep and Charge function under function. USB Charge within the TOSHIBA Settings. When there is a current overflow of the external device connected to the compatible port, USB bus power (DC5V) supply might be stopped for safety reasons.
  • Page 134 Problem Procedure The battery depletes If Sleep and Charge function is enabled, the quickly even when I computer's battery discharges during hibernation turned OFF the or when the computer is turned off. power of the Connect the AC adaptor to the computer or disable computer.
  • Page 135 Volume cannot be adjusted during Windows start up or shut down. If you are still unable to resolve the problem, contact TOSHIBA Support. External monitor Also refer to Operating Basics, and to the documentation supplied with your monitor for further information.
  • Page 136 Display error occurs Check that the cable connecting the external monitor to the computer is firmly attached. If you are still unable to resolve the problem, contact TOSHIBA Support. Problem Procedure Cannot access LAN Check for a firm cable connection between the LAN jack and the LAN hub.

  • Page 137: Toshiba Support

    TOSHIBA Support. TOSHIBA support If you require any additional help using your computer or if you are having problems operating the computer, you might need to contact TOSHIBA for additional technical assistance. Before you call Some problems you experience might be related to software or the operating system so it is important that you investigate other sources of assistance first.
  • Page 138 - they are your best resource for current information and support. TOSHIBA technical support If you are still unable to solve the problem and suspect that it is hardware- related, read the enclosed warranty booklet or visit the TOSHIBA technical support website http://pc-support.toshiba.eu User's Manual...

  • Page 139: Appendix Specifications

    Chapter 7 Appendix Specifications This section summarizes the technical specifications of the computer. Physical Dimensions (A30-C) The following physical dimensions do not include parts that extend beyond the main body. The physical dimensions vary depending on the model you purchased. Size Approximately 316 (w) x 229 (d) x 22.4 (h) millimeters Approximately 316 (w) x 229 (d) x 25.4 (h) millimeters (touch...
  • Page 140 Conditions Altitude (from sea level) Operating -60 to 3,000 meters Non-operating -60 to 10,000 meters maximum Power Requirements AC adaptor 100-240V AC 50 Hz or 60 Hz (cycles per second) Computer 19V DC External RGB monitor port pin assignment Signal Name Description Red Video Signal Green Video Signal...

  • Page 141: Ac Power Cord And Connectors

    Signal Name Description Serial Clock Signal I/O (I): Input to computer I/O (O): Output from computer AC Power Cord and Connectors The AC input plug of the power cord must be compatible with the various international AC power outlets and the cord must meet the standards for the country/region in which it is used.

  • Page 142: Information For Wireless Devices

    6-15P (250 V) or 5-15P (125 V) as designated in the U.S. National Electrical code handbook and the Canadian Electrical Code Part II. The following illustrations show the plug shapes for the U.S.A. and Canada, the United Kingdom, Australia, Europe, Middle-East, Africa, South Africa, Switzerland, Italy and China.
  • Page 143 Because wireless products operate within the guidelines found in radio frequency safety standards and recommendations, TOSHIBA believes wireless products are safe for use by consumers. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature.
  • Page 144 If this occurs, the outsider might illegally access your system, eavesdrop, or cause the loss or destruction of stored data. TOSHIBA is not liable for the loss of data due to eavesdropping or illegal access through the wireless LAN and the damage thereof. Card Specifications Compatibility IEEE 802.11 Standard for Wireless LANs...
  • Page 145 Network Operating Microsoft Windows Networking System Media Access CSMA/CA (Collision Avoidance) with Protocol Acknowledgment (ACK) Radio Characteristics Radio Characteristics of Wireless LAN module might vary according to: Country/region where the product was purchased Type of product Wireless communication is often subject to local radio regulations. Although Wireless LAN wireless networking products have been designed for operation in the license-free 2.4 GHz and 5 GHz band, local radio regulations might impose a number of limitations to the use of wireless...
  • Page 146 ® You cannot use the built-in Bluetooth functions of the computer and an ® ® external Bluetooth adaptor simultaneously. For reference, Bluetooth wireless technology has the following features: Security Two advanced security mechanisms ensure a high level of security: Authentication prevents access to critical data and makes it impossible to falsify the origin of a message.
  • Page 147 Russian Limited Using SRD (Short Range Device) with Federation: implementation FHSS (Frequency-Hopping Spread Spectrum) modulation. Maximum 2.5mW (4dBm) EIRP (Equivalent Isotropically Radiated Power) is permitted to use. Maximum 100mW (20dBm) EIRP is permitted to use with the following conditions: Permitted to use SRD for outdoor applications without restriction on installation height only for purposes of gathering telemetry...
  • Page 148 Using SRD with DSSS (Direct Sequence Spread Spectrum) and other than FHSS wideband modulation. Maximum EIRP density is 2mW/ MHz. Maximum100mW (20dBm) EIRP is permitted to use. Maximum EIRP density is 20mW/ MHz. Maximum 100mW (20dBm) EIRP is permitted to use with the following condition: It is permitted to use SRD for outdoor applications only for...
  • Page 149 Maximum Power Output (2400 - 2483.5 MHz) IEEE802.11 b/ Maximum 100mW (20dBm) EIRP g/n mode (2400 - 2483.5 MHz) BLE / Maximum 10mW (10dBm) EIRP Bluetooth (5150 - 5725 MHz) IEEE802.11 a/n/ Maximum 200mW (23dBm) EIRP ac mode The low band 5.15 - 5.35 GHz is for indoor use only.
  • Page 150 Band 8 WCDMA 900 Tx: 880–915 MHz +23 dBm ± 1 dB Rx: 925–960 MHz Band Frequencies Conducted Tx (Transmit) power tolerances GSM frequency band support Tx: 824–849 MHz +32 dBm ± 1 dB GMSK mode, connectorized (Class 4; 2 W, 33 dBm) +27 dBm ±...
  • Page 151 Tx: 1,850–1,910 +29 dBm ± 1 dB GMSK mode, 1900 connectorized (Class 1; 1 W, 30 dBm) +26 dBm ± 1 dB 8PSK mode, connectorized (Class E2; 0.4 W, 26 dBm) Rx: 1,930–1,990 To remain in conformance with European spectrum usage laws for Wireless LAN operation, the above 2.4GHz and 5GHz channel limitations apply for outdoor usage.
  • Page 152 Caution: Exposure to Radio Frequency Radiation The radiated output power of the Wireless device is far below the FCC radio frequency exposure limits. Nevertheless, the Wireless device shall be used in such a manner that the potential for human contact during normal operation is minimized.
  • Page 153 If this equipment causes RF interference to other radio stations, promptly change the frequency being used, change the location of use, or turn off the source of emissions. Contact an authorized TOSHIBA service provider if you have problems with interference caused by this product to Other Radio Stations.

  • Page 154: Information About Intel® Amt

    (1) (2) (3) 2.4 : This equipment uses a frequency of 2.4 GHz. FH : This equipment uses FH-SS modulation. 1 : The interference range of this equipment is less than 10 m. : This equipment uses a frequency bandwidth from 2,400 MHz to 2,483.5 MHz.
  • Page 155 Using built-in platform capabilities and popular third-party management and ® security applications, Intel AMT allows IT to better discover, heal, and protect their networked computing assets. Consult with your system administrator about configurations of the AMT function before connecting to a network. Disable the AMT function ®...
  • Page 156 Enter a new password. Password must comply with the following requirements concerning character types and length: Must be between 8 and 32 characters long. Must contain at least one number (“0”, “1-9”). Must contain a mix of lower-case (“a”, “b”, “z”, etc.) and upper-case (“A”, “B”, “Z”, etc.) letter.

  • Page 157: Information About Intel® Authenticate

    When using the computer with the AC adaptor connected and the AMT function set to enabled, power might still be supplied to the system memory even when the computer power is turned off, or the computer is in Sleep Mode or Hibernation Mode. When connecting the AC adaptor, the computer is powered and can be turned on.

  • Page 158: Legal Footnotes

    For optimum performance, use your computer product only under recommended conditions. Read additional restrictions in your product documentation. Contact TOSHIBA technical service and support, refer to TOSHIBA support section for more information.
  • Page 159 Published battery life numbers are achieved on select models and configurations tested by TOSHIBA at the time of publication. Recharge time varies depending on usage. Battery might not charge while computer is consuming full power.
  • Page 160 Over a period of time, and depending on the usage of the computer, the brightness of the LCD screen will deteriorate. This is an intrinsic characteristic of LCD technology. Maximum brightness is only available when operating in AC power mode. Screen dims when the computer is operated on battery power and you might not be able to increase the brightness of the screen.

  • Page 161: Index

    Index AccuPoint 4-6 Touch Pad 6-10 AC adaptor additional 4-45 connecting 2-3 DC IN 19V jack 3-3, 3-16 Equipment checklist 2-1 External monitor problems 6-14 Battery extending life 4-22 monitoring capacity 4-21 real time clock 3-23, 4-18 Hard disk drive save mode 5-9 automatic power off 5-8 types 4-17...
  • Page 162 6-5 inserting 4-36 Power 6-4 removing 4-37 Real Time Clock 6-7 Sound system 6-13 TOSHIBA support 6-16 Memory media slot 4-34 Touch Pad 6-10 USB device 6-12 Moving the computer 1-19 USB mouse 6-11 MultiMediaCard removing 4-37...
  • Page 163 Touch Screen 4-1 USB device problems 6-12 Video mode 4-47 Web Camera 3-9, 3-20 Wireless communication 7-6 User's Manual Index-3...

This manual is also suitable for:

Portege a30t-cPortege a30-cSatellite pro a30t-cSatellite pro a40-cSatellite pro r40-cTecra a40-c

Table of Contents