Toshiba Satellite A40 Maintenance Manual page 136

3 Tests and Diagnostics
Subtest 07 DMI read
This subtest displays the information in the Flash-ROM in the following format.
*** DMI Data Display Ver X.XX ***
Model Name
Version Number
Serial Number
Model Number
PCN/BND Number
UUID Number
Press [Enter] to EXIT
To exit this subtest and return to the SYSTEM test menu, press Enter.
Subtest 08 DMI write
The following messages appear in order. Input each information. (If you do not
replace the PCB, the DMI information should not be changed.)
1. "Enter Model Name ?" is displayed.
Input the computer's model name and press Enter. (e.g. DynaBook)
2. "Enter Version Number ?" is displayed.
Input the computer's version number and press Enter. (e.g. PC18070C313S)
3. "Enter Serial Number ?" is displayed.
Input the computer's serial number and press Enter. (e.g. 12345678)
4. "Enter Model Number ?" is displayed.
Input the computer's sales model number and press Enter. (e.g. PP200-
AAAAA)
5. "Enter Bundle Number ?" is displayed.
Input the computer's PCN/Bundle number and press Enter. (e.g.
PMSREQ3Q34H/S0123456789)
6. "Write data OK (Y/N) ?" is displayed.
To write the DMI information to the Flash ROM, press Y, and then Enter.
3-12
: XXXXXXXXXXX
: XXXXXXXXXXXX
: XXXXXXXX
: XXXXXX-XXXXX
: XXXXXXXXXXXX/XXXXXXXXXXX
: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Satellite A40 Maintenance Manual (960-458)
3.4 System Test