Toshiba Satellite A40 Maintenance Manual page 326

4 Replacement Procedures
4. Remove the board assembly, adhesive tape, light guide and cover assembly bottom (L).
1) Remove the board assembly.
2) Remove the adhesive tape securing the sheets (four points).
3) Remove the sheets and light guide.
NOTE: No penetration of foreign object is indispensable not to scratch the sheets.
4) Remove the screw and cover assembly bottom (L).
NOTE: Maximum value of torque is 1.5kg cm.
Board assembly
Double-sided tape
Adhesive tape
Sheets and LGP
Screw
Figure 4-84 Replacing 15.0 Inch LG.Philips fluorescent lamp (XGA) (4)
4-102
Adhesive tape Double-sided tape
Double-sided tape
Cover assembly bottom (L)
4.26 Fluorescent lamp
Adhesive tape
Double-sided tape
Adhesive tape
Screw
Satellite A40 Maintenance Manual (960-458)