4 Replacement Procedures
4.24 LCD cable/Sensor switch/Wireless LAN antenna
Removing the LCD cable/Sensor switch/Wireless LAN antenna
To remove the LCD cable/sensor switch/wireless LAN antenna, follow the steps below and refer to
figures 4-38 to 4-43.
1. Remove the following screws and LCD cable holder on the back.
M2.5 4
2. Remove the following screw and cable holder on the front.
M2.5 4
4-62
4.24 LCD cable/Sensor switch/Wireless LAN antenna
Tapping screw
LCD cable holder
Figure 4-38 Removing the LCD cable holder
Tapping screw
M2.5 4 Tapping
Figure 4-39 Removing the cable holder
2
M2.5 4 Tapping
1
Cable holder
Satellite A40 Maintenance Manual (960-458)