Toshiba Satellite A40 Maintenance Manual page 194

3.23 SETUP
(b) Parallel Port Mode
Use this option to set information of ECP and Standard Bi-directional.
ECP
Std. Bi-Direct.
NOTE: When the Windows is used, the setting in "Toshiba HW setup" has the priority.
The setting in "Parallel Port Mode" is ignored.
(c) Hard Disk Mode
Use this item to select the hard disk mode.
Enhanced IDE (normal)
Standard IDE Select this mode when using an OS which does not support the
NOTE: Formats for Enhanced IDE and Standard IDE are different, so if you change the
setting, you will have to reformat the hard disk for the appropriate setting.
14. LEGACY EMULATION
(a) USB KB/Mouse Legacy Emulation
This option sets the Legacy support condition of the USB keyboard and the USB
mouse.
Enabled
Disabled
Satellite A40 Maintenance Manual (960-458)
Sets the port mode to Extended Capabilities Port (ECP). For
most printers, the port should be set to ECP. (Default)
Sets the bi-directional setting. This setting should be used with
some other parallel devices.
Select this mode when the HDD is used for MS-DOS ,
Windows 95/98/2000/XP, or OS/2 .
Enhanced IDE. When this mode is selected, up to 528MB is
logically available and the rest of the capacity is not usable.
Enables LEGACY support. (Default)
USB keyboard/USB mouse are available without the driver.
Disables LEGACY support
3 Tests and Diagnostics
(Default)
3-67