4 Replacement Procedures
4. Turn the LCD module face down. Remove four screws fixing the board and remove the
FPC (G). Open the bent portion of the TCP of the board and remove the backlight.
Screw
Figure 4-132 Replacing 15.0 Inch Sharp fluorescent lamp (SXGA+) (4)
Do not hold the edge.
Figure 4-133 Replacing 15.0 Inch Sharp fluorescent lamp (SXGA+) (5)
4-138
Screw loosening torque: 0.9kg cm
Open the cap of the connector and
remove the FPC.
Raise the board and make this condition.
4.26 Fluorescent lamp
(G) FPC
Do not hold the edge.
Satellite A40 Maintenance Manual (960-458)
Screw
Screw
Screw