Toshiba Satellite A40 Maintenance Manual page 191

Maintenance manual
Hide thumbs Also See for Satellite A40:
Table of Contents

Advertisement

3 Tests and Diagnostics
For the Alarm Time, set the time to turn on the power automatically. The "second"
cannot be set. When it is set to "Disabled", the time to turn on automatically is not
set.
For the Alarm Date Option, set the date to turn on the power automatically.
When it is set to "Disabled", the time to turn on automatically is not set.
The Ring Indicator is displayed only when the computer is in Resume mode and
this function cannot be used for a PC card-type modem. When any modem is not
installed, it is not displayed.
NOTE: 1. Do not remove the AC adaptor and battery pack at the same time when you
use this feature. If you do so, data saved by the resume function will be lost.
You must also reset this option.
2. If you have set a password and the computer boots by the Auto Power On
function and Resume is on, the computer will start with the instant security
function enabled. The password = message is not displayed; however, you
must enter the password to use the computer.
3. This option is enabled only once, the setting is reset, after booting up.
(g) Panel Power On/Off
This option is displayed in the resume mode.
Enabled
Disabled
8. Configuration
This option lets you set the device configuration.
All Devices
Setup by OS
NOTE: When using installed OS, selecting "Setup by OS" is recommended. But, when
setting "PC CARD-Controller Mode" to other than " Auto-Selected", select "
All Devices".
3-64
Enables the Panel Power On/Off.
Disables the Panel Power On/Off. (Default)
BIOS sets all devices.
Operating system sets devices that it can control. (Default)
Satellite A40 Maintenance Manual (960-458)
3.23 SETUP

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Satellite a40 series

Table of Contents