Running Test; Function Description; Operations - Toshiba Satellite A40 Maintenance Manual

3 Tests and Diagnostics

3.20 Running Test

3.20.1 Function Description

This function automatically executes the following tests in sequence:
1. System test (subtest 01)
2. Memory test (subtests 01, 02 and 06)
3. Display test (subtest 01)
4. FDD test (subtest 02)
5. HDD test (subtests 01)
6. Real timer test (subtest 02)
7. Printer test (subtest 03) if selected
The system automatically detects the number of floppy disk drives connected to the computer for
the FDD test.

3.20.2 Operations

CAUTION: Do not forget to load a work disk in the FDD. If a work disk is not loaded,
an error will be generated during the FDD testing.
1. Remove the diagnostics disk from the floppy disk drive and insert the formatted work disk.
2. Select 6 from the Diagnostic Menu and press Enter, the following message displays:
Printer wrap around test (Y/N) ?
Selecting Y (yes) executes the printer wraparound test. A printer wraparound connector
must be connected to the parallel port of the computer to properly execute this test.
3. Select Y or N and press Enter. The following message will appear:
Serial #A wrap around test (Y/N) ?
Selecting Y (yes) executes the Serial #A test. An RS-232-C wraparound connector must
be connected to the serial port of the computer to properly execute this test.
3-44
3.20 Running Test
Satellite A40 Maintenance Manual (960-458)