Toshiba Satellite A40 Maintenance Manual page 367

4 Replacement Procedures
4.26.9 Replacing the 15.0 Inch SXGA+ Sharp Fluorescent lamp
CAUTION: When you replace the fluorescent lamp, wear finger covers or gloves to
avoid contaminating or damaging the LCD module. Be careful not to let
dust or other foreign substances into the LCD module.
Disassembling the 15.0-inch SXGA+ Sharp Fluorescent lamp
To disassemble the 15.0 inch SXGA+ Sharp fluorescent lamp, follow the steps below and refer to
Figures 4-129 to 4-138.
1. Turn the LCD module face down, and remove the protection cover S (A), protection cover
G (B), fixing tape (C) and fixing tape for lead wire (D).
NOTE: 1) Be careful not to damage the TCP or chips.
2) Discard the tapes removed. Do not reuse them.
Figure 4-129 Replacing 15.0 Inch Sharp fluorescent lamp (SXGA+) (1)
4-136
(A) Protection cover S
(C) Fixing tape
(D) Fixing tape for lead wire
(B) Protection cover
Satellite A40 Maintenance Manual (960-458)
4.26 Fluorescent lamp