Lanaddress; Syntax; Parameters; Monarch - HP Integrity rx2660 User's & Service Manual

Example C-18 info boot command
Shell> info boot
BOOT INFORMATION
Monarch CPU:
Current

Monarch

CPU
Module/
Logical
-------
0/0
AutoBoot: ON - Timeout is : 10 sec
Boottest:
BOOTTEST Settings Default Variable
OS is not speedy boot aware.
Selftest
---------
early_cpu
late_cpu
platform
chipset
io_hw
mem_init
mem_test
LAN Address Information:
LAN Address
-----------------
*Mac(000E7F7E07FA)
Mac(000E7F7E07FB)

lanaddress

Displays the core I/O MAC address.

Syntax:

lanaddress

Parameters

none
Example C-19 lanaddress command
LAN Address Information:
LAN Address
-----------------
Mac(00306E4C4F1A)
*Mac(00306E4C0FF2)
monarch
Displays or modifies the ID of the bootstrap processor. The preferred monarch number is stored
in NVM.
232 Utilities
Preferred
Monarch
CPU
Module/
Logical Warnings
--------- --------
0/0
Setting
--------------
Run this test
Run this test
Run this test
Run this test
Run this test
Run this test
Run this test
Path
----------------------------------------
Acpi(HWP0002,100)/Pci(2|0)/Mac(000E7F7E07FA))
Acpi(HWP0002,100)/Pci(2|1)/Mac(000E7F7E07FB))
Path
----------------------------------------
Acpi(HWP0002,0)/Pci(3|0)/Mac(00306E4C4F1A))
Acpi(HWP0002,100)/Pci(2|0)/Mac(00306E4C0FF2))