Listing The Local Npartition Number - HP Rp7410 - Server - 0 MB RAM Administrator's Manual

1. Login to a system with the nPartition commands installed.
If using remote administration features to list nPartition configurations, you can login to
any system with Enhanced nPartition Commands installed.
2. Issue the parstatus -P command to list a summary of all nPartitions in the server complex.
For detailed information issue the parstatus -V -p# command for more information
about a specific nPartition (-p# where # is the nPartition number).
Procedure 8-28 Listing nPartition Configurations (Partition Manager)
You can list nPartition configurations for a server complex by using Partition Manager.
When using Partition Manager Version 1.0, view the left side of the primary window to see a
display of all nPartitions in the server, and for details select an nPartition and select the
Details Show Complex Details action.
When using Partition Manager Version 2.0, use the nPartitions tab to view details about all
nPartitions in the complex.
1. Access Partition Manager.
For details on accessing Partition Manager or other tools, see
(page 223).
2. From Partition Manager Version 1.0, view the left side of the primary window to see a
display of all nPartitions in the server. For further details about a specific nPartition, select
the nPartition and select the Details Show Complex Details action.
From Partition Manager Version 2.0, use the nPartitions tab to view details about all
nPartitions in the complex.
3. Exit Partition Manager.
From Partition Manager Version 1.0, select the File Exit action.
From Partition Manager Version 2.0, select Log off parmgr or exit the Web browser when
finished.

Listing the Local nPartition Number

You can list the local nPartition number by using any one of the following procedures:
• "Listing the Local nPartition Number (BCH Menu)" (page 237)
• "Listing the Local nPartition Number (EFI Shell)" (page 238)
• "Listing the Local nPartition Number (nPartition Commands)" (page 238)
The local nPartition number is the numerical identifier for the nPartition currently being accessed
(where the command executes).
Procedure 8-29 Listing the Local nPartition Number (BCH Menu)
From the BCH Configuration Menu, use the PD command to list the local nPartition number and
its name. The BCH Menu is available only on HP 9000 systems.
1. Access the BCH Main Menu for the nPartition whose name and number you want to list.
Login to the service processor (MP or GSP) and enter CO to access the Console list. Select
the nPartition console. When accessing the console, confirm that you are at the BCH Main
Menu (the Main Menu: Enter command or menu> prompt). If at a BCH menu other
than the Main Menu, then enter MA to return to the BCH Main Menu.
2. Enter CO to access the BCH Configuration Menu.
3. Enter the PD command to list the local nPartition number and its name.
"Tools for Listing Status"
Listing the Local nPartition Number 237