HP Rp3440-4 - 9000 - 0 MB RAM Software Manual
  1. Manuals
  2. Brands
  3. HP Manuals
  4. Server
  5. Rp3440-4 - 9000 - 0 MB RAM
  6. Software manual
HP Rp3440-4 - 9000 - 0 MB RAM Software Manual

HP Rp3440-4 - 9000 - 0 MB RAM Software Manual

Configuring and troubleshooting ms dfs links in an hp cifs server (samba) environment
Hide thumbs Also See for Rp3440-4 - 9000 - 0 MB RAM:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Service Manual, Installation Manual
Configuring and Troubleshooting MS DFS links in an HP
CIFS Server (Samba) Environment
Executive summary............................................................................................................................... 2
What IS MS DFS? ............................................................................................................................ 2
Configuring MS DFS on HP CIFS Server ................................................................................................. 2
Test environment .............................................................................................................................. 2
Configuration details ........................................................................................................................ 3
Modifying the smb.conf file: .......................................................................................................... 3
Creating the MS DFS links: ............................................................................................................ 4
New to SAMBA 3.x:..................................................................................................................... 5
Testing our MS DFS environment........................................................................................................ 6
How it works ................................................................................................................................... 9
Redundant MS DFS links ................................................................................................................. 11
Troubleshooting MS DFS on HP CIFS Server.......................................................................................... 13
Problem 1: The network path was not found...................................................................................... 13
Problem 2: Logon failure: unknown username or password. ................................................................ 18
Summary .......................................................................................................................................... 19
For more information.......................................................................................................................... 19

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Rp3440-4 - 9000 - 0 MB RAM and is the answer not in the manual?

Questions and answers

Related Manuals for HP Rp3440-4 - 9000 - 0 MB RAM

Summary of Contents for HP Rp3440-4 - 9000 - 0 MB RAM

  • Page 1: Table Of Contents

    Configuring and Troubleshooting MS DFS links in an HP CIFS Server (Samba) Environment Executive summary..........................2 What IS MS DFS? ..........................2 Configuring MS DFS on HP CIFS Server ....................2 Test environment ..........................2 Configuration details ........................3 Modifying the smb.conf file: ......................3 Creating the MS DFS links: ......................

  • Page 2: Executive Summary

    Executive summary HP CIFS Server (Samba) has the ability to host Microsoft Distributed File System (MS DFS). With careful planning, this can enable you to create a virtual smb file and directory tree spanning multiple servers and file systems. This whitepaper presents a sample configuration of MS DFS on an HP CIFS Server and discusses several potential pitfalls encountered in a MS DFS environment.

  • Page 3: Configuration Details

    Figure 1 gives us a picture of our test environment. Figure 1: MS DFS Test Environment Server:ceres Server:rkm-nt Shared_stuff Dfsroot linka linkb Server:mccall Shared_stuff Client:mccallevo Configuration details There are three steps to configuring MS DFS on an HP CIFS Server. Two modifications to the /etc/opt/samba/smb.conf file and the actual creation of the MS DFS links in the HP-UX file system directory that is hosting the MS DFS root.

  • Page 4: Creating The Ms Dfs Links

    password server = ceres log level = 10 syslog = 0 log file = /var/opt/samba/log.%m max log size = 1000 host msdfs = Yes read only = No [dfsroot] path = /dfsroot msdfs root = Yes Note the two red colored parameters above in [global] and [dfsroot], respectively: ‘Host msdfs = yes’: This parameter must be set to yes to enable samba to host MS DFS links in individual shares.

  • Page 5: New To Samba 3.X

    NOTE: Currently the symbolic names used in MS DFS links must be in lowercase. New to SAMBA 3.x: A new version of HP CIFS Server, A.02.01.01, was released in February 2005. The information in this paper is equally applicable to this release, which includes ADDITIONAL MS DFS functionality, enabled by the share level option ‘msdfs proxy’.

  • Page 6: Testing Our Ms Dfs Environment

    Testing our MS DFS environment Now that we have configured the HP CIFS Server to offer a couple of MS DFS links, let ’s see it in action. For this purpose, we have created a single file on each of the linked shares: \\ceres\shared_stuff: filename=ceres_test.txt \\mccall\shared_stuff: filename = mccall_test.txt Figure 2: Shares and files on CERES and MCCALL...
  • Page 7 Let’s use our Windows/XP client ‘mccallevo’ to connect to these shares THROUGH the MS DFS links we have set up on the share \\rkm-nt\dfsroot. Figure 3: MS DFS links 'linka' & 'linkb' Notice from Figure 3 that these links show up as standard folders.
  • Page 8 When we click on the ‘linkb’ folder, we get: Figure 4: Contents of 'linkb' And we can see in Figure 4 that, indeed, the file we put on the \\mccall\shared_stuff directory DOES show up. So the redirection through the MS DFS link was successful. We clicked on a ‘directory’ in our \\rkm-nt\dfsroot share, and ended up on the ‘shared_stuff’...

  • Page 9: How It Works

    If we click on the folder ‘linka’, we are also successful. Figure 5: Contents of 'linka' So, we have demonstrated that by connecting to a single HP CIFS Server, ‘rkm-nt’ we are able to actually access files on completely independent servers. How it works The mechanism behind this is interesting.
  • Page 10 Figure 6: Highlighted line shows client request for info on linka, the MS DFS link. Note the response immediately after, with the Error: STATUS_PATH_NOT_COVERED...

  • Page 11: Redundant Ms Dfs Links

    Figure 7: Highlighted line shows response to the MS DFS referral request from the client - note the 'Node: \ceres\shared_stuff' field in the detail window. This is the actual referral to the 'shared_stuff' share on the server 'ceres'. Redundant MS DFS links You can build some redundancy into your MS DFS links by referencing two or more server\share referrals with the same link.
  • Page 12 And then, take ‘ceres’ offline. Note the results in the following screen snapshot. Figure 8: Note that the file 'mccall_test.txt' is the file from \\mccall\shared_stuff, since the 1st referral to \\ceres\shared_stuff was unavailable. The failure to find \\ceres\shared_stuff was transparent to the user. NOTE: Both the client AND the server hosting the MS DFS root do some form of caching in regards to links that have been followed.

  • Page 13: Troubleshooting Ms Dfs On Hp Cifs Server

    Troubleshooting MS DFS on HP CIFS Server So, now that we know what it looks like when it WORKS, let’s step through troubleshooting a couple of common problems you might run into. Problem 1: The network path was not found. I have followed the above configuration steps, and my users can connect to the SHARE, but when they click on the MS DFS link, they get the following error.
  • Page 14 Figure 10: Trace of a failing MS DFS referral due to client being unable to resolve node name in referral response. In the screen shot for Figure 10, we see the ‘STATUS_PATH_NOT_COVERED’, followed by the ‘GET_DFS_REFERRAL’. THEN we see a number of packets involving name lookup for the server ‘ceres’, who is the server we got a MS DFS referral for.
  • Page 15 But what about the CLIENT? We will use the command prompt window to try to directly attach to the server and share we are being referred to. Figure 11: Using cmd window to check direct access to a server and share As we can see from the above screenshot, the client is not able to get to the referred server/sharename DIRECTLY.
  • Page 16 We could add the ‘ceres’ server and its ip address to the local lmhosts file on the client. Choice # 3 is the simplest from a testing standpoint. So we add the following line to the /windows/system32/drivers/etc/lmhosts file on the client 16.113.9.139 ceres #PRE...
  • Page 17 And NOW, as the screenshot below shows, we are able to successfully follow the MS DFS link. Figure 12: Adding an lmhosts entry and reloading the NetBIOS name cache from the cmd window Naturally, in a production environment, you would want to either use WINS or DNS, to globally resolve name issues across your enterprise rather than having to add entries to the lmhosts file of every client needing to follow this link.

  • Page 18: Problem 2: Logon Failure: Unknown Username Or Password

    Problem 2: Logon failure: unknown username or password. I have followed the above configuration steps and my users can connect to the SHARE but when they click on the MS DFS link, they get the following error. Figure 13: Error returned to the client as a result of a bad username or password on the referred server To begin troubleshooting this, we must first remember that the user having access to the HP CIFS Server HOSTING the MS DFS root doesn’t guarantee that that same user will have access to the server that the MS DFS link will refer him to!

  • Page 19: Summary

    verify this by having the client attempt to directly connect to the referred server and share returned in the trace, i.e. ‘mccall\shared_stuff’ as shown below using the command prompt window on the client. Figure 15: Using the cmd window to test for valid username/password directly to the referred server At this point, you should have the client contact the administrator of the ‘mccall’...
  • Page 20 http://us1.samba.org/samba/docs/man/Samba-HOWTO-Collection/ Using Samba 2nd Edition, by Ts, Eckstein and Collier-Brown (O'REILLY Press) also available online at: http://us1.samba.org/samba/docs/using_samba/toc.html Implementing CIFS, by Christopher Hertel (Prentice Hall) also available online at: http://www.ubiqx.org/cifs/ Ethereal Users Guide, available online at: http://www.ethereal.com/docs/user-guide/ In addition, there are numerous articles available from Microsoft on MS DFS. While these are not specifically applicable to MS DFS on Samba, they do give useful background and implementation information.
  • Page 21 © 2005 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty.

This manual is also suitable for:

Rp5405 - 9000 - 16 gb ramRp7410 - server - 0 mb ramL1000 - 9000 - 0 mb ram

Table of Contents