Table 6-1 nPartition Configuration Task Summaries (continued)
Task
"Unassigning
(Removing) Cells from an
nPartition"
"Renaming an
nPartition"
"Renaming a Server
Complex"
Summary
• NOTE:
When an inactive cell is specified to be removed from an nPartition the
removal occurs immediately. When an active cell is specified to be removed from an
nPartition, to complete the cell removal the nPartition must perform a reboot for
reconfig (HP-UX: shutdown -R; Windows: shutdown /r; Linux: shutdown -r
time; OpenVMS: @SYS$SYSTEM:SHUTDOWN with an automatic system reboot).
• nPartition Commands: parmodify -p# -d#command, which unassigns the cell
(-d#, where # is the cell number) from the specified nPartition (-p#, where # is the
nPartition number).
When removing an active cell, you must specify the -B option if you want the nPartition
to be active after the reboot for reconfig.
• Partition Manager:
— Version 1.0 — Select an nPartition, and use the Partition Modify Partition action,
Add/Remove Cells tab.
— Version 2.0 — Select an nPartition, and use the nPartition Modify nPartition
action, Add/Remove Cells tab.
See
"Unassigning (Removing) Cells from an nPartition" (page
• BCH Menu: Configuration menu, PD NewName command, where NewName specifies
the new name for the nPartition. Quotation marks are not needed, even if the name
includes spaces.
• nPartition Commands: parmodify -p# -P name command, where -P name specifies
the new name for the nPartition (-p#, where # is the nPartition number).
If the nPartition name includes spaces you must specify it in quotation mark (for
example: "nPar Name 1").
• Partition Manager:
— Version 1.0 — Partition Modify Partition , General tab.
— Version 2.0 — nPartition Modify nPartition , General tab.
See
"Renaming an nPartition" (page
• nPartition Commands: cplxmodify -N name command.
Only the Enhanced nPartition Commands support the cplxmodify command.
If the complex name includes spaces you must specify it in quotation mark (for example:
"Cplx Name 1").
• Partition Manager: Complex Set Complex Name action.
See
"Renaming a Server Complex" (page
Task Summaries for Creating and Configuring nPartitions
182).
185).
187).
167
Need help?
Do you have a question about the Rp7410 - Server - 0 MB RAM and is the answer not in the manual?
Questions and answers