Parunlock Command - HP Rp7410 - Server - 0 MB RAM Administrator's Manual

parunlock Command

The parunlock command unlocks the Stable Complex Configuration Data or Partition
Configuration Data.
The Enhanced nPartition Commands version of parunlock also can unlock Dynamic Complex
Configuration Data and cell data and can cancel pending changes to the Stable Complex
Configuration Data.
Use this command with caution.
Root permission is required to run this command.
NOTE: On servers based on the HP sx1000 chipset or HP sx2000 chipset, when the nPartition
Configuration Privilege is restricted the parunlock command
• cannot unlock the Partition Configuration Data of non-local nPartitions,
• cannot unlock the Dynamic Complex Configuration Data or Stable Complex Configuration
Data for the local complex,
• cannot cancel pending changes to the Stable Complex Configuration Data, and
• cannot unlock the cell data of cells not assigned to the local nPartition.
These restrictions do not apply when using the -g... -h... options.
Refer to the parunlock(1M) manpage for details.
Synopsis
parunlock [-p PartitionNumber] [-s]
parunlock -A
Enhanced nPartition Commands only:
parunlock [-d] [-c cell] [-P]
Enhanced nPartition Commands Notes
• The -u... -h... set of options may be specified to cause the command to send its
management request using WBEM to an nPartition other than the local nPartition (but can
also be used as a "loopback access" to the local nPartition).
• The -g... -h... options may be specified to cause the command to send its management
request using IPMI over LAN to a service processor in another server complex (but can also
be used as a "loopback access" to the service processor in the local complex).
The -u and -g options are mutually exclusive.
Options
-p PartitionNumber
-s
-d
-c cell
-P
260 nPartition Commands
Unlock the Partition Configuration Data of the specified
nPartition.
Unlocks the Stable Complex Configuration Data of the target
complex.
Enhanced nPartition Commands only. Unlocks the Dynamic
Complex Configuration Data of the target complex.
Enhanced nPartition Commands only. Unlocks the cell data of
the specified cell.
Enhanced nPartition Commands only. Cancels any pending
changes to the Stable Complex Configuration Data of the target
complex.