HP Rp7410 - Server - 0 MB RAM Administrator's Manual page 232

2. At the Command Menu, enter the IO command to list the connections from I/O chassis to
cells; the IO command is supported for HP Superdome servers only.
To list the power status for I/O chassis, and the locations of installed I/O chassis, issue the
PS command, and select the cabinet option for the server cabinet whose I/O configuration
you want to view:
• On HP Superdome servers, select the B (cabinet) option, and specify the cabinet whose
information you want to view.
• On all other systems, select the T (cabinet) option.
3. To exit the service processor Command Menu, enter MA to return to the service processor
Main Menu.
At the Main Menu, enter X to exit the service processor interface.
Procedure 8-15 Listing Input/Output Configurations (BCH Menu)
From the BCH Information Menu use the IO command to list I/O details for the local nPartition.
The BCH Menu is available only on HP 9000 systems.
1. Access the BCH Main Menu for the nPartition whose I/O configuration you want to list.
Login to the service processor (MP or GSP) and enter CO to access the Console list. Select
the nPartition console. When accessing the console, confirm that you are at the BCH Main
Menu (the Main Menu: Enter command or menu> prompt). If at a BCH menu other
than the Main Menu, then enter MA to return to the BCH Main Menu.
2. Enter IN to access the BCH Information Menu.
3. Enter the IO command to list I/O details for all active cells in the local nPartition.
The IO command provides details that include I/O chassis information, I/O module (PCI
card slot) details, and information about PCI devices (installed PCI cards).
4. Exit the console and service processor interfaces if finished using them.
To exit the BCH environment type ^B (Control-B); this exits the nPartition console and
returns to the service processor Main Menu. To exit the service processor, type X at the Main
Menu.
Procedure 8-16 Listing Input/Output Configurations (EFI Shell)
From the EFI Shell environment, use theinfo io command to list I/O details for the local
nPartition. The EFI Shell is available only on HP Integrity systems.
1. Access the EFI Shell environment for the nPartition whose I/O configuration you want to
list.
Login to the service processor (MP or GSP) and enter CO to access the Console list. Select
the nPartition console.
When accessing the console, confirm that you are at the EFI Boot Manager menu (the main
EFI menu). If at another EFI menu, select the Exit option from the sub-menus until you
return to the screen with the EFI Boot Manager heading.
From the EFI Boot Manager menu, select the EFI Shell menu option to access the EFI Shell
environment.
2. Enter the info io command to list I/O details for all active cells in the local nPartition.
The info io command reports details that include I/O chassis information, I/O module
(PCI card slot) details, and information about PCI devices (installed PCI cards).
3. Exit the console and service processor interfaces if finished using them.
To exit the EFI environment type ^B (Control-B); this exits the nPartition console and returns
to the service processor Main Menu. To exit the service processor, type X at the Main Menu.
232 Listing nPartition and Hardware Status