Listing Npartition Configurations - HP Rp7410 - Server - 0 MB RAM Administrator's Manual

1. Login to a system with the nPartition commands installed.
If using remote administration features, you can login to any system with Enhanced nPartition
Commands installed.
2. Issue the parstatus -X command to display the product number and serial number.
Procedure 8-25 Listing Product and Serial Numbers (Partition Manager)
You can list the product number and serial number for a complex by using Partition Manager.
When using Partition Manager Version 1.0, select the Complex Show Complex Details action
and General tab.
When using Partition Manager Version 2.0, select the General tab.
1. Access Partition Manager.
For details on accessing Partition Manager or other tools, see
(page 223).
2. From Partition Manager Version 1.0, select the Complex Show Complex Details action
and General tab to list the product number and serial number for the server complex.
From Partition Manager Version 2.0, select the General tab to list the product number and
serial number.
3. Exit Partition Manager.
From Partition Manager Version 1.0, select the File Exit action.
From Partition Manager Version 2.0, select Log off parmgr or exit the Web browser when
finished.

Listing nPartition Configurations

You can list nPartition configurations by using any one of the following procedures:
• "Listing nPartition Configurations (Service Processor)" (page 236)
• "Listing nPartition Configurations (nPartition Commands)" (page 236)
• "Listing nPartition Configurations (Partition Manager)" (page 237)
nPartition configuration information includes a list of which cells are assigned to which
nPartitions, and additional details such as the core cell choices, boot device paths, and nPartition
names.
Procedure 8-26 Listing nPartition Configurations (Service Processor)
From the service processor Command Menu, use the CP command to list the nPartition
configurations for the server complex. The CP command reports information including the
nPartition numbers and corresponding cells assignments.
1. Login to the service processor (MP or GSP) and enter CM to access the Command Menu.
2. At the Command Menu, enter the CP command to list the nPartition configurations: the
nPartition numbers and corresponding cells assignments for the server complex.
3. To exit the service processor Command Menu, enter MA to return to the service processor
Main Menu.
At the Main Menu, enter X to exit the service processor interface.
Procedure 8-27 Listing nPartition Configurations (nPartition Commands)
From the command line, issue the parstatus -P command to list a summary of all nPartitions
in the server complex. For detailed information issue the parstatus -V -p# command for
more information about a specific nPartition (-p# where # is the nPartition number).
236 Listing nPartition and Hardware Status
"Tools for Listing Status"