Performing A Transfer Of Control Reset - HP Rp7410 - Server - 0 MB RAM Administrator's Manual

3. Exit the console and service processor interfaces if finished using them.
To exit the BCH environment type ^B (Control-B); this exits the nPartition console and
returns to the service processor Main Menu. To exit the service processor, type X at the Main
Menu.
Procedure 5-4 Finding Bootable Devices (EFI Shell)
From the EFI Shell environment, issue the map command to list bootable devices. The EFI Shell
is available only on HP Integrity systems.
1. Access the EFI Shell environment for the nPartition whose bootable devices you want to
list.
Login to the service processor (MP or GSP) and enter CO to access the Console list. Select
the nPartition console.
When accessing the console, confirm that you are at the EFI Boot Manager menu (the main
EFI menu). If at another EFI menu, select the Exit option from the sub-menus until you
return to the screen with the EFI Boot Manager heading.
From the EFI Boot Manager menu, select the EFI Shell menu option to access the EFI Shell
environment.
2. At the EFI Shell, issue the map command to list all disk devices with a potentially bootable
EFI System Partition.
For details see the help map command. Also see the help search command for details
on using the search command to load drivers for bootable devices.
3. Exit the console and service processor interfaces if finished using them.
To exit the EFI environment type ^B (Control-B); this exits the nPartition console and returns
to the service processor Main Menu. To exit the service processor, type X at the Main Menu.

Performing a Transfer of Control Reset

You can perform a transfer of control (TOC) reset by using the Service Processor (MP or GSP)
TC command, as described in the following procedure.
If crash dump is configured for the operating system on the nPartition, when you TOC the
nPartition while it is running the operating system then the nPartition performs a crash dump.
Procedure 5-5 Performing a Transfer of Control Reset (Service Processor)
Use the Command menu TC command to perform a transfer-of-control (TOC) reset of an
nPartition.
1. Login to the service processor (MP or GSP) and enter CM to access the Command Menu.
2. At the Command menu, enter the TC command, specify which nPartition is to be reset, and
confirm whether to TOC the nPartition.
The TC command performs a transfer-of-control reset on the specified nPartition.
If you are accessing the service processor using a single-partition-user account, the TC
command selects which nPartition is to be reset: the nPartition that your account allows you
to access.
If using an operator or administrator account, you can select which nPartitions in the server
complex you want to TOC.
Be certain to select the correct nPartition to be reset.
GSP:CM> TC
This command TOCs the selected partition.
WARNING: Execution of this command irrecoverably halts all system
processing and I/O activity and restarts the selected
Performing a Transfer of Control Reset 107