Listing Cabinets In A Server Complex - HP Rp7410 - Server - 0 MB RAM Administrator's Manual

Listing Cabinets in a Server Complex

You can list the cabinets in a server complex by using any one of the following procedures:
• "Listing Cabinets in a Server Complex (Service Processor)" (page 234)
• "Listing Cabinets in a Server Complex (nPartition Commands)" (page 234)
• "Listing Cabinets in a Server Complex (Partition Manager)" (page 234)
Cabinet details include the cabinet type, a list of cells, I/O chassis, power supplies, utilities, fans,
firmware components, interconnecting hardware. Other information such as the power status,
faults, and LED states also are given.
Procedure 8-19 Listing Cabinets in a Server Complex (Service Processor)
From the service processor Command Menu, use the PS command and the cabinet option to list
the current status for the desired cabinet.
1. Login to the service processor (MP or GSP) and enter CM to access the Command Menu.
2. To list the current status for a cabinet in the server complex, issue the PS command and
select the cabinet option for the server cabinet whose configuration and details you want to
view:
• On HP Superdome servers, select the B (cabinet) option, and specify the cabinet whose
information you want to view.
• On all other systems, select the T (cabinet) option.
3. To exit the service processor Command Menu, enter MA to return to the service processor
Main Menu.
At the Main Menu, enter X to exit the service processor interface.
Procedure 8-20 Listing Cabinets in a Server Complex (nPartition Commands)
From the command line, use the parstatus -B command to list all cabinets in the server
complex, or use the parstatus -V -b# command to view a detailed status for the specified
cabinet (-b# where # is the cabinet number).
1. Login to a system with the nPartition commands installed.
If using remote administration features to list cabinet details, you can login to any system
with Enhanced nPartition Commands installed.
2. Issue commands to list details about cabinets in the target complex.
• parstatus -B — List all cabinets in the server complex.
• parstatus -V -b# — View a detailed status for the specified cabinet (-b# where #
is the cabinet number).
Procedure 8-21 Listing Cabinets in a Server Complex (Partition Manager)
You can list details about the cabinets in a server complex by using Partition Manager.
When using Partition Manager Version 1.0, select the Details Show Complex Details action;
the General tab and the Cabinet Info tab provide cabinet-related information.
When using Partition Manager Version 2.0, select the Hardware tab for an overview of cabinets
in the complex. For complete details about all hardware in the complex, select the
Complex Show Complex Details action.
1. Access Partition Manager.
For details on accessing Partition Manager or other tools, see
(page 223).
2. List cabinet details for the server complex.
From Partition Manager Version 1.0, select the Details Show Complex Details action,
then select the Cabinet Info tab. The General tab also provides cabinet-related information.
234 Listing nPartition and Hardware Status
"Tools for Listing Status"