HP Rp7410 - Server - 0 MB RAM Administrator's Manual page 248

• The -u... -h... set of options may be specified to cause the command to send its
management request using WBEM to an nPartition other than the local nPartition (but can
also be used as a "loopback access" to the local nPartition).
NOTE:
the Enhanced nPartition Commands installed and have WBEM configured. Also, the
client.pem file on the system from which the command is issued must have a copy of the
SSL certificate entry (including the BEGIN and END lines) from specified host's server.pem
file.
See "Remote Management Using WBEM" (page 44)
• The -g... -h... options may be specified to cause the command to send its management
request using IPMI over LAN to a service processor in another server complex (but can also
be used as a "loopback access" to the service processor in the local complex).
NOTE:
IPMI LAN access enabled. Also, the user who issues the command must correctly specify
the host's IPMI password in order for the command to be able to successfully complete.
See "Remote Management Using IPMI over LAN" (page 46)
The -u and -g options are mutually exclusive.
For more details about remote management, see
(page 41).
248 nPartition Commands
When specifying the -u... -h... options, the host specified by -h must be have
When specifying the -g... -h... options, the host specified by -h must have
for details.
for details.
"Remote and Local Management of nPartitions"