HP Rp7410 - Server - 0 MB RAM Administrator's Manual page 156

To set a boot path, enter PATH VAR hwpath, where VAR is the boot path variable (PRI,
HAA, or ALT) and hwpath is a boot device hardware path.
For example, to set the PRI boot path to a new value (4/0/2/0/0.10, in this case) enter PATH
PRI 4/0/2/0/0.10, as shown below.
Main Menu: Enter command or menu > PATH PRI 4/0/2/0/0.10.0
Primary Boot Path:
Main Menu: Enter command or menu >
3. Exit the console and service processor interfaces if finished using them.
To exit the BCH environment type ^B (Control-B); this exits the nPartition console and
returns to the service processor Main Menu. To exit the service processor, type X at the Main
Menu.
Procedure 5-56 Configuring Boot Paths and Options (EFI Boot Manager)
From the EFI Boot Manager environment, use the use Boot Option Maintenance operations to
add or delete boot options, or to change the order of items in the boot options list. The EFI Boot
Manager is available only on HP Integrity systems.
1. Access the EFI Boot Manager menu for the nPartition whose boot paths (the EFI boot options
list items) and options you want to configure.
Login to the service processor (MP or GSP) and enter CO to access the Console list. Select
the nPartition console.
When accessing the console, confirm that you are at the EFI Boot Manager menu (the main
EFI menu). If at another EFI menu, select the Exit option from the sub-menus until you
return to the screen with the EFI Boot Manager heading.
2. Select the Boot Option Maintenance option from the main EFI Boot Manager menu.
3. At the Boot Option Maintenance menu use the Add a Boot Option, Delete Boot Option(s),
and Change Boot Order menu items to add or delete boot options or change the order of
items in the boot options list.
EFI Boot Maintenance Manager ver 1.10 [14.60]
Main Menu. Select an Operation
4. Exit the console and service processor interfaces if finished using them.
To exit the EFI environment type ^B (Control-B); this exits the nPartition console and returns
to the service processor Main Menu. To exit the service processor, type X at the Main Menu.
156 Booting and Resetting nPartitions
4/0/2/0/0.10
4/0/2/0/0.a
Boot from a File
Add a Boot Option
Delete Boot Option(s)
Change Boot Order
Manage BootNext setting
Set Auto Boot TimeOut
Select Active Console Output Devices
Select Active Console Input Devices
Select Active Standard Error Devices
Cold Reset
Exit
(hex)