Command Reference For Efi Shell Commands; Efi Shell Command Reference - HP Rp7410 - Server - 0 MB RAM Administrator's Manual

Table 4-2 Service Processor (MP or GSP) Command Reference (continued)
Command
PARPERM
PD
RL
SA
SO
XD

Command Reference for EFI Shell Commands

Table 4-3 lists the commands supported by the EFI Shell interface on cell-based HP Integrity
servers.
The EFI Shell is accessible from an nPartition console when the nPartition is in an active state
but has not booted an operating system.
The following categories of commands are available:
• "Boot Commands — EFI
• "Configuration Commands — EFI
• "Device, Driver, and Handle Commands — EFI
• "Filesystem Commands — EFI
• "Memory Commands — EFI
• "Shell Navigation and Other Commands — EFI
• "Shell Script Commands / Programming Constructs — EFI
For details on these commands, enter help command at the EFI shell prompt.
Table 4-3 EFI Shell Command Reference
Command
Boot Commands — EFI Shell
autoboot
bcfg
boottest
dbprofile
lanboot
reconfigreset
reset
search
Configuration Commands — EFI Shell
acpiconfig
cellconfig
cpuconfig
date
Description
Restrict/unrestrict nPartition Reconfiguration Privilege.
Modify default nPartition for this login session.
Rekey Complex Profile locks (unlock Complex Profile).
Display and set (enable/disable) MP remote access methods.
Configure security options and access control (user accounts and passwords).
MP diagnostics and reset.
Shell".
Shell".
Shell".
Shell".
Description
Commands related to nPartition booting.
Set/view autoboot timeout variable.
Display/modify the driver/boot configuration.
Set/view BootTest bits.
Display/modify direct boot profiles for use by lanboot.
Boot over the LAN.
Reset the system (nPartition) for reconfiguration; the nPartition remains inactive, in the
shutdown for reconfig state.
Reset the system (nPartition).
Connect drivers for bootables devices.
Commands for changing and retrieving system (nPartition) information.
Set/view ACPI configuration mode.
Deconfigure/reconfigure cells. (Set cell use-on-next-boot values.)
Deconfigure/reconfigure processors and processor cores..
Display the current date or set the date of the system (nPartition).
Shell".
Shell".
Shell".
Command Reference for EFI Shell Commands 81