HP Rp7410 - Server - 0 MB RAM Administrator's Manual page 188

1. Login to the service processor (MP or GSP) and enter CM to access the Command Menu.
2. At the Command Menu, issue the ID command to list the complex name.
The ID command lists some of the Stable Complex Configuration Data for the current server,
including the complex name.
GSP:CM> ID
This command allows you to change certain fields in the Stable complex
configuration portion of the complex profile.
Retrieving the stable complex configuration portion of the complex profile.
GSP modifiable stable complex configuration data fields.
Model String
Complex System Name
Complex Serial Number
Original Product Number: A5201A
Current Product Number : A5201A
Enterprise Id
Do you want to modify any of this information? (Y/[N])
3. Specify whether you want to modify the complex profile, including its name.
Only modify the "Complex System Name". Do not change the model string, serial number,
or other details used by commands, utilities, and licensing tools.
To cancel the changes at any time enter q to quit the ID command without modifying the
complex profile.
4. To exit the service processor Command Menu, enter MA to return to the service processor
Main Menu.
At the Main Menu, enter X to exit the service processor interface.
Procedure 6-14 Renaming a Server Complex (nPartition Commands)
From the command line, use the cplxmodify -N name command to rename a server complex.
The cplxmodify command currently only is supported by the Enhanced nPartition Commands.
NOTE:
You can remotely perform this task using remote administration options supported by
the Enhanced nPartition Commands or Partition Manager Version 2.0. Remote administration
is supported by the Partition Manager Tools Switch Complexes action and by the nPartition
command -u... -h... options or -g... -h... options.
For details see
1. Login to a system with the nPartition commands installed.
If using remote administration features to rename a complex, you can login to any system
with Enhanced nPartition Commands installed.
2. Issue the the cplxmodify -N name command to rename the local server complex.
To list the current complex name, issue the parstatus -X command.
Procedure 6-15 Renaming a Server Complex (Partition Manager)
You can rename a server complex from Partition Manager by selecting the Complex Set
Complex Name action.
1. Access Partition Manager.
For details on accessing Partition Manager or other tools, see
nPartitions" (page
188 Creating and Configuring nPartitions
: 9000/800/SD64000
: feshd5
: USR2024FP1
:
"Tools for Configuring nPartitions" (page
165).
165).
"Tools for Configuring