Find Bootable Devices; List Npartition Configurations; List The Local (Current) Npartition Number - HP Rx2620-2 - Integrity - 0 MB RAM Manual

Find bootable devices

Procedure 4-5 Find bootable devices [EFI Shell]
Find bootable devices using the following procedure:
1. Access the EFI Shell environment for the nPartition whose bootable devices you want to
list.
Log in to the MP and enter CO to access the Console list. Select the nPartition console.
When accessing the console, confirm that you are at the EFI Boot Manager menu (the main
EFI menu). If you are at another EFI menu, select Exit from the submenus until you return
to the screen with the EFI Boot Manager heading.
2. From the EFI Boot Manager menu, select EFI Shell to access the EFI Shell environment.
3. At the EFI Shell, issue the map command to list all disk devices with a potentially bootable
EFI System Partition.
For details, see the help map command. Also see the help search command for details
on using the search command to load drivers for bootable devices.
4. Exit the console and MP interfaces when you are finished using them.
a. To exit the EFI environment press ^B (Control-B). This exits the nPartition console and
returns you to the MP Main Menu. To exit the management processor, enter X at the
Main Menu.
b. To exit the MP, enter X at the Main Menu.

List nPartition configurations

nPartition configuration information includes a list of which cells are assigned to which nPartitions
and such additional details as the core cell choices, boot device paths, and nPartition names.
Procedure 4-6 Listing nPartition configurations [nPartition commands]
List nPartition configurations using the following procedure:
1. Log in to Windows on the management station PC.
2. From the command line, issue the parstatus -P command to list a summary of all
nPartitions in the server complex.
For detailed information, issue the parstatus -V -p# command for more information
about a specific nPartition (-p#, where # is the nPartition number).
NOTE:
commands (-h and -g for IPMI over LAN connections; -h and -u for WBEM/WMI
connections). For a complete explanation of these options, see the command description in
"nPartition Commands Reference" (page

List the local (current) nPartition number

The local nPartition number is the numerical identifier for the nPartition currently being accessed
(where the command executes).
Procedure 4-7 Listing the local (current) nPartition number [nPartition commands]
List the local nPartition number using the following procedure:
1. Log in to Windows on the management station PC.
You must include the correct remote administration options when issuing nPartition
89).
nPartition-level tasks 47