Lvm-Maintenance Mode Hp-Ux Booting - HP Rp7410 - Server - 0 MB RAM Administrator's Manual

fs0:\> hpux
(c) Copyright 1990-2002, Hewlett Packard Company.
All rights reserved
HP-UX Boot Loader for IA64
Press Any Key to interrupt Autoboot
\efi\hpux\AUTO ==> boot vmunix
Seconds left till autoboot -
[User Types A Key to Stop the HP-UX Boot Process and Access the HPUX.EFI Loader ]
Type 'help' for help
HPUX>
5. At the HPUX.EFI interface (the HP-UX Boot Loader prompt, HPUX>) enter the boot -is
vmunix command to boot HP-UX (the /stand/vmunix kernel) in single-user (-is) mode.
HPUX> boot -is vmunix
> System Memory = 4063 MB
loading section 0
................................................... (complete)
loading section 1
........ (complete)
loading symbol table
loading System Directory(boot.sys) to MFS
....
loading MFSFILES Directory(bootfs) to MFS
......
Launching /stand/vmunix
SIZE: Text:25953K + Data:3715K + BSS:3637K = Total:33306K
Console is on a Serial Device
Booting kernel...
6. Exit the console and management processor interfaces if you are finished using them.
To exit the EFI environment, press ^B (Control-B); this exits the nPartition console and
returns to the management processor Main Menu. To exit the management processor, type
X at the Main Menu.

LVM-Maintenance Mode HP-UX Booting

This section describes how to boot HP-UX in LVM-maintenance mode on cell-based HP 9000
servers and cell-based HP Integrity servers.
• On HP 9000 servers, to boot HP-UX in LVM-maintenance mode refer to
Mode HP-UX Booting (BCH Menu)" (page
• On HP Integrity servers, to boot HP-UX in LVM-maintenance mode refer to
"LVM-Maintenance Mode HP-UX Booting (EFI Shell)" (page
Procedure 5-12 LVM-Maintenance Mode HP-UX Booting (BCH Menu)
From the BCH Menu, you can boot HP-UX in LVM-maintenance mode by issuing the BOOT
command, stopping at the ISL interface, and issuing hpux loader options. The BCH Menu is
available only on HP 9000 servers.
1. Access the BCH Main Menu for the nPartition on which you want to boot HP-UX in
LVM-maintenance mode.
Log in to the management processor (MP) and enter CO to access the Console list. Choose
the nPartition console. When accessing the console, confirm that you are at the BCH Main
Menu (the Main Menu: Enter command or menu> prompt). If you are at a BCH menu
other than the Main Menu, then enter MA to return to the BCH Main Menu.
116 Booting and Resetting nPartitions
Revision 1.723
9
116).
"LVM-Maintenance
117).