Active Onboard Administrator Virtual Buttons Tab - HP Integrity Superdome 2 User Manual

Item
Spare Part Number
Serial Number
Diagnostic Information
Item
Device Identification
Data
Firmware Mismatch

Active Onboard Administrator Virtual Buttons tab

1. Click the Reset button to reset the Onboard Administrator.
2. A confirmation screen appears, asking if you are sure that you want to perform the action
and that you will be signed out and disconnected from the Onboard Administrator.
3. Click OK to proceed, or click Cancel to exit without a change.
Click the Toggle On/Off button to change the Onboard Administrator module UID LED. This button
is useful in identifying a particular Onboard Administrator when there is more than one.
90 Configuring HP Integrity Superdome 2 compute enclosures and enclosure devices
Description
The spare part number to use when ordering an additional or replacement Onboard
Administrator.
The unique serial number of the Onboard Administrator.
Description
This row displays information such as model name, part number, serial number, and other
information used to identify the device. This data is also called FRU data. A device identification
data error appears if the data is not present or not readable by the Onboard Administrator.
Possible values are OK or Error.
The Onboard Administrator with the lowest firmware version displays this box when two
Onboard Administrators are present.