Changing And Deleting Registration Contents Of Encryption Key; Operation At The Sending System - Kyocera KM-2560 Operation Manual

Setup and Registration

Changing and Deleting Registration Contents of Encryption Key

Operation at the Sending System

6-28
6
Press [OK]. To register other encryption keys, repeat steps 3 to 6.
7
To exit from this setup, press [Close] several times until the System Menu
default screen is displayed.
1
Follow steps 1 to 2 of Registering an Encryption Key on page 6-27.
2
Select the encryption
key to be changed or
deleted. To change
the registration
contents, go to step
3, and to delete the
registration
contents, go to step
7.
3
Press [Register/Edit].
4
Press [Encryption Key].
5
Press [Backspace] to delete the encryption key last entered. Use the
numbers (0 to 9) and the alphabet (A to F) on the touch panel, enter the
encryption key (16 digits), and press [OK].
6
Press [OK]. When the change confirmation screen appears, press [Yes].
Go to step 8.
7
Press [Delete]. When the deletion confirmation screen appears, press
[Yes].
8
To change or delete other encryption keys, follow steps 2 to 7.
9
To exit from this setup, press [Close] several times until the System Menu
default screen is displayed.
When sending originals by encrypted transmission, use the Address Book
registered for encryption or set encrypted transmission when dialing
directly using the numeric keys.
NOTE:
Encrypted transmission can be also used in broadcast
transmission.
With encryption communication, you cannot conduct sub address
communication.
FAX - Encrypt . Key Registration
Register a key to use for encrypted FAX transmissions . (Up to 20 keys can be registered.)
Encryption Key
Key01
Key02
Key03
Key04
Key05
Status
1/4
Register
/Edit
Delete
Close
10/10/2007 10:00
OPERATION GUIDE