Receiving Documents Automatically (Automatic Fax Reception) - Kyocera TASKalfa 181 Operation Manual

Receiving Documents Automatically (Automatic Fax Reception)

Automatic Fax Reception is the default setting for fax reception in this machine and no special
settings are required for its use.
Note
In order to use the Automatic Fax Reception mode, it is necessary to select the Fax Reception
[Fax Rx] under Selecting the Automatic Reception Mode ("Receive Mode" setting) on
page 7-12.
<Reception modes>
This fax machine offers the following ways to receive a fax.
•
•
•
•
•
Checking the reception mode
1
Make sure that the Auto RX Indicator is lit.
> Changing the reception mode
Open the cover plate to the left and press the
TAD/Manual RX key to light the Auto RX Indicator.
Receiving a fax
2
When a fax comes in, fax reception will begin automatically after the amount of time equal to a
designated number of rings.
Note
Once fax reception begins, the Communicating indicator will light but the message display itself
will not show any indication of the reception in progress.
Automatic Fax Reception.
Manual Fax Reception...See page 3-22.
Auto FAX/TEL Switching...See page 5-1.
TAD Reception...See page 5-3.
D.R.D. Reception (Inch version only)...See page 5-5.
Fax Operation (Basic Use)
2-9