Profile; Profile Configuration Parameters - HP AK241A - StorageWorks 8Gb Simple SAN Connection Cli Manual

profile

Description Creates and modifies profiles with which to customize Call Home e-mail notification. A profile
defines the event severity level at which to generate e-mails, e-mail subject and text, and e-mail
recipients.
NOTE: The Call Home service provides an e-mail notification capability for the switch. This service
has no relationship with the HP Call Home feature, which notifies HP services.
Authority Admin session and a Callhome Edit session. For information about starting a Callhome Edit session,
see the callhome command.
Syntax
profile
copy [profile_source] [profile_destination]
create [profile]
delete [profile]
edit [profile]
rename [profile_old] [profile_new]
Operands
copy [profile_source] [profile_destination]
Creates a new profile named [profile_destination] and copies the configuration into it from the
profile given by [profile_source]. You must enter the callhome save command to save your
changes. Neither [profile_source] nor [profile_destination] can be Tech_Support_Center.
create [profile]
Creates a profile with the name given by [profile]. A profile name must begin with a letter and be
no longer than 32 characters. Valid characters are alphanumeric, _, $, ^, and -. The
Tech_Support_Center profile name is reserved. The Call Home database supports a maximum of
25 profiles. You must enter the callhome save command to save your changes.
describes the profile configuration parameters.
Table 16

Profile configuration parameters

Parameter
Level
Format
MaxSize
EmailSubject
Description
Event severity level at which to generate a Call Home e-mail message:
• None—Generates e-mail messages for all events.
• Warn—Generates e-mail messages for Warning, Critical, and Alarm
events.
• Critical—Generates e-mail messages for Critical and Alarm events.
• Alarm—Generates e-mail messages for Alarm events only.
Level of detail to be included in the e-mail message:
• ShortText—Includes switch and event information.
• FullText—Includes switch information, event information, Call Home
contact information, and SNMP contact information.
• Tsc1—Includes switch and event information in a format intended for
automated e-mail readers.
Maximum number of characters allowed in the e-mail message. Decreasing
this parameter makes it easier to read messages on small display devices
such as cell phones. The minimum is 650. The maximum and default is
2,000,000.
Subject of the e-mail; up to 64 characters
8/20q Fibre Channel Switch command line interface guide 181
Table 16