Set Alarm; Output Stream Alarm Parameters - HP AK241A - StorageWorks 8Gb Simple SAN Connection Cli Manual

set alarm

Description Controls the display of alarms in the session output stream or clears the alarm log.
Authority Admin session for the clear operand. Otherwise, none.
Syntax
set alarm [option]
Operands
[option]
Table 32
Table 32

Output stream alarm parameters

Parameter
clear
on
off
Examples The following is an example of the set alarm command:
8/20q FC Switch #> set alarm on
describes the output stream alarm parameters.
Description
Clears the alarm log history. This value requires an Admin session.
Enables the display of alarms in the session output stream.
Disables the display of alarms in the session output stream.
Disabling the display of alarms in the output stream allows
command scripts to run without interruption.
8/20q Fibre Channel Switch command line interface guide 199